Facelift front bumper fitting (not flush)

Hi guys,.

Need some help with my facelift bumper fitting. Does not seem flush.

Any tips/ideas? I clipped the middle part first before moving on to screwing back the sides. One thing I realised is that the passenger side headlight does not sit as far back as the driver's side (not sure if this is normal)

The metal bit for the bumper inserts below the headlight seem to be protruding more on the driver's side (p/s : pics if passenger side).

Just wondering have you sorted your problem with your front bumper as i have the same problem with mine. Cheers

The plastic retainer where you put the bolt to secure the bumper into the fender is popping out over time. Remove that plastic retainer, then make sure the fender is flat or hit the retainer couple times with a hammer until it lays flat. Bolt the bumper back and it should lay flat.