how to increase the caster for Honda Civic Ferio Ek4 jdm

Hi!
How to increase the caster for Honda Civic Ferio EK4 jdm??
The cars setup:
Skunk upper arm, places to change the left and right.
Tein type Flex coilovers
Front stabilizer Ek9 typeR
settings:
Front -3.20 degrees toe 0
Rear -2.20, -0.10 toe.
Now caster 1.40, i want to increase.
I will be glad to hear tips.

You can use a white line rear castor bush, or you can swap your subframe and lower wishbones for that of an EG or DC2, the eg/doc wishbones can be split and spaced to get extra castor

Eoghain said:

You can use a white line rear castor bush, or you can swap your subframe and lower wishbones for that of an EG or DC2, the eg/doc wishbones can be split and spaced to get extra castor

Click to expand...

White line offers the option of increasing the caster only 0.6 degrees. It is not enough for me. The car is only use on the track. Lower wishbones Civic Ek and DC different.
Alternatively, consider the installation of the composite wishbones Civic coupe EJ7. The bottom wishbones similar to the wishbones by Integra DC. And further increase the caster with washers as is done in this picture. http://www.whiteline.com.au/product_detail4.php?part_number=KCA301
The difference is visible in the wishbones. http://www.ek9.org/index.php?media/albums/different-suspension-ek-dc-ej7.1459/

You mention you have a Front EK9 ARB (stabilizer bar). What do you have on the rear?

Im assuming you want more caster to fight understeer?

If you are determined to get more caster then have you considered a DC2/EG subframe and arms swap.

KieranEG6 said:

You mention you have a Front EK9 ARB (stabilizer bar). What do you have on the rear?

Im assuming you want more caster to fight understeer?

If you are determined to get more caster then have you considered a DC2/EG subframe and arms swap.

Click to expand...

Rear mounted amplifier ASR and stabilizer bar Ek9 and Cusco Aluminum shaft tower bar between coilovers.
I think I need to prepare for next year's swap.