Recent content by martinmck06

i never sold you the car m8, i sold it to someone in paisley

thats the car running :D finally! the timing belt slipped 3 teeth and i was lucky internally there was no damage! thanks for the help every1 ;)

hello the garage done a compression test on the engine and all cylinders are low! will this be the timing that out or the head gone? the coolant looks fine with no sign of oil leaking in, the head will be getting took off next week to see what the problem could be, any1 had this problem? cheers

A feel like its the dizzy because it was running but when I changed it over it didn't want to start! Weird! Any1 had any problems with the ignitor? I have tryed the new coil in 2 different dizzy, surely both them can't be gone

but the car was running with the b16a2 dizzy and i drove it home and changed it over for the correct 1 and it didnt start! i will check it again!

Would it not try 2 start if the timing was out just a bit? Doesn't even sound like it wants 2 start! The thing is I was driving it and when I parked it up I changed the dizzys over! So it was running and starting before I changed the dizzys! I changed it cos it was a dizzy off a b16a2 and I was...

I have 3 dizzys here and not 1 of them will start it, just cranks ova! Iam gettin spark so I think the dizzy is ok, its got a brand new coil in it and new spark plugs! My car has a full earthing kit so I don't think it could be an earth! I will take them all off and clean them up! Don't know...

just fitted a new coil pack and still nothing its just cranking over and still has a spark and i can smell fuel on the spark plugs :( really dont know what to do with it anymore, any ideas any1

i have tryed new leads, i just ordered a new coil 2day so a will try tht and if it still not running i might just break the car!

yes it was ok! i drove it home with the b16a2 dizzy on but it had flat spots in the revs so i got the other 1 changed over then nothing! i even tryed putting the one that was working back on and that doesnt want to work now! my dad changed the leads around to see if i put them on wrong and it...

hello my b16a just cut off when i was driving it, got it towed back home and there was no spark, i had another dizzy off a b16a2 (td81u) sitting and this worked in the car but was running a bit ruff! i got a 2nd hand dizzy for a b16a again(td86u), after fitting that there was a spark but wouldnt...

That's. 2nd had dizzy I just got, its sparking but would it still spark if the ignitor chip was gubbed? Might buy another 1 and hope for the best, nothing else I can do

it has spark, has fuel, everythings were it should! checked the timing belt hasnt slipped! still just crankin over! any ideas

i just fitted a new dizzy 2day and still not working! just cranking over! i will have to look at the spark plugs i think!

hopefully that all it is cheers, anything else i should check?