Recent content by Streaky

Short answer... No. Look for one from a coupe or saloon. Its a straight fit. If you want the red/black stitched gear gaitor they are interchangeable, or PW:JDM do a copy.

It's an absolute pig to do. Having tried twice before, i always bite the bullet and get remanufactured now. Good luck, you'll need patience of a saint! :lol: Worth a try though - play your local motorfactors off against each other. I got my last DC2 ones at £80 per side.

Oh, you'll also find you have a much wider wheel choice with NSX ones, as most 15"s will clear them. With the ATR set up you'll genereally find a 16" wheel is needed (although there are some 15"s that will clear it.) NSX = 282mm disc ATR - 300mm disc

I've had NSX calipers on my old EG6 and currently have ATR twinpots on my EM1. Both have been more than enough to try to launch me through the windscreen when stamping on the anchors. Both are straight bolt on, no fuss, hoses mate up fine etc. Although you will probably find you need to use a...

DC2 rails are noticeably lower than EK9 ones. I'm 6ft 5 and much prefer them. However, only 3 of the 4 holes line up as standard. It's easy to mod the 4th with a grinder and big washer. That would be my suggestion - the above rails you've mentioned are silly money!

My EG didn't have them, neither does my EM. From personal experience, they fall into the "shiny things that give you JDM bragging points" category.

SWAYBAR As for it "fitting" - yes it does. BUT if you want the ARB you really need a subframe brace fitted as well or you risk tearing the subframe mounting points. ASR and Function 7 make them; piccy of mine fitted. BRAKES If you have done a 5 stud hub conversion then yes, no worries...

NSX / ATR twinpots also use the same size pads.

Whats the budget chap? I have these... se...

I can help with the coilovers! Let me know if interested. *sorry, copied/pasted from my breaking thread. Eibach Pro Street S Stainless Steel coilovers. AWESOME bit of kit, complete with EK9 top mounts. 18 months old but aonly about 5,000 miles covered. Fantastic condition, height...

I think I can help you chap. This is mine. Selling up reluctantly - I need an estate having recently become a father. eBay - The UK's Online Marketplace I've removed a few bits to get it to a more reasonable price. As it is though it comes with fully adjustable front and rear camber...

Sent you a message on CL chap.

Hi Dale, I have an EK9 rear ARB, with bushes, clamps and decent droplinks attached; as well as a Function 7 subframe brace with all the necessary fittings. Even got matching Function 7 LCA's (modified to take the oem arb droplinks) to go with them should you be interested. All taken off...

Feedback here please :)

I'm potentially in the market for some EK9 cams. Will be moving to Aldershot next week (currently in Woking) so I can't be a million miles away from you! Any figure on the mileage as I can't see it specified anywhere and do you have a set of adjustable cam gears available too? Will be due a...