Search results


  1. R

    EK9 RED CARPETS

    Genuine EK9 door cards! eBay item number 163804232231
  2. R

    EK9 RED CARPETS

    You could also get the black interior plastics from an EK4. Red EK9 carpets are fairly pricey! Have you joined all the Honda Facebook selling pages?
  3. R

    Soon-to-be one colour

    Here’s my 96 EJ9, I’ve done a facelift conversion. It’s going in to be painted in the next few weeks, just repainted the wheels in Championship White and fitted new Toyos! Coilovers etc to come, if anyone is interested in following how I get on my instagram is @rocketingricer
  4. R

    Civic b16a2

    A friend of mine had to rebuild his ek9 after tracking without a baffled sump or an oil pressure and oil temperature gauge , learned the hard way .
  5. R

    Ek3 trailing arm

    But if for some reason you do need a complete new arm I do have one on my breaker, the bush will need replacing though.
  6. R

    Ek3 trailing arm

    I highly doubt you need to replace your arm, just the bush. I’m about to do mine, common problem, I’d personally polybush both sides, I use the Hardrace rear trailing arm bushes, they’re around £70! You can get them on eBay, 6two1, tegiwa etc
  7. R

    EJ9 MANUAL TO AUTO

    I’ve never done it or know anyone who has but I imagine it’s more hassle than it’s worth tbh, the wiring alone, I bet all the interior loom is different! You’ll have to fit a clutch pedal and everything else, it’ll be easier to just buy a manual car.
  8. R

    Idle issue

    Sounds like your idle air control valve.
  9. R

    New member (EJ9 build x2)

    I know! Thank you . To many of these things get scrapped
  10. R

    New member (EJ9 build x2)

    I repaired the front chassis leg, i managed to hammer it flat and get it looking as much like the passenger side as I could but it’s not 100%, the bit that was squashed flat was also spot welded in so I was able to remove it and replace it with the one off the donor car! I’ve now got the front...
  11. R

    New member (EJ9 build x2)

    (Follow up 2) Got the front panel off the donor car today no trouble, well chuffed! Now I just need to sort the drivers side chassis leg out (shouldn’t be hard) and then to bolt the front panel on the car and get all the lights, bumper etc... lining up and then I can spot weld it back and paint...
  12. R

    New member (EJ9 build x2)

    (Follow up) I got the front end off my girlfriends EJ9 last night, drilled all the spot-welds out and then just prized it off to break the joints, the drivers side chassis leg is damaged, it’s been crushed back flat from the accident (see pic) but I can cut it off my donor car and weld it on...
  13. R

    New member (EJ9 build x2)

    Hi, just joined! My partner and I both have ej9’s mine I’ve converted to a facelift and my girlfriends I’m about to put a new front end on as it’s had a knock on the drivers side and all the lights and panels are out of line, I’ve got a donor car for all the bits and pieces I need and I have...
Top