Search results


  1. Kipper

    Nissin Rear Brake Calipers Honda Civic EK9 Integra DC2 Type R

    Lings Honda can often be useful for things like this, You'll soon find out most things on the chassis are fine thread (1.25mm). https://www.lingshondaparts.com/partscatalog/catalog/listing/catalog/hondacars/modelid/19762/block/17ST701/blockref/B__1910/ DC2 reg plate entered but very much the...
  2. Kipper

    Code 15 ignition output signal

    I would probably check wiring to dizzy and if it’s okay try another one, they can be funny things. But usually go without an EML to be honest. Which makes me think wiring somewhere.
  3. Kipper

    Still in a Honda - Civic EG Racer

    Hello all, This is just an update with what I am up to in the world of Honda since I don't bother much with social media and what not. I have created a few build threads in here over the years and got the itch for racing, well I always had but never pursued it. '94 B18C EG (It's basically a DC2...
  4. Kipper

    Anyone know where to get prefacelift ek9 headlights??

    You after new or used?
  5. Kipper

    Release bearing question

    Did you buy an Exedy clutch kit out of interest? I replaced a used exedy kit in my car (well just rel bearing as clutch was in good condition) and the release bearing had like a shoddy plastic part of the housing and didn’t feel like it had taken the miles well in general with the slop in it...
  6. Kipper

    Tegiwa Driveshafts

    I had looked at the Tegiwa shafts as it looked like there was some consideration of balance/vibration as they have those rubber doughnuts installed like a lot of OEM Honda shafts but haven't tried them. I haven't been having a great time with driveshafts on my racecar, The J&R CV boots seem to...
  7. Kipper

    Built Gearbox / Gearsets / LSD’s (non-OEM)

    Gents, looking for some gearbox upgrades, anyone have anything that they would sell? M-factory gear seats, plated diffs, full boxes even? Cheers Kris
  8. Kipper

    Genuine Honda EK9/DC2 Driveshafts & New OEM Honda clutch

    All, after the above if anyone has anything! Low mileage OEM Honda shafts in good condition is the ideal. Cheers Kris
  9. Kipper

    Reducing Emissions

    Borrow a UKDM DC2 Cat & Midpipe could be a shout. Usual good blast and making sure she is up to temperature obviously. Condition of o2 sensor is important too. All about getting it lean on idle, wonder if a EK4 VTi ECU would help with that. I’ve heard people getting their maps tweaked for...
  10. Kipper

    My 2000 Sunlight Yellow EK9

    Really nice and orginal looking EK9 and applaud your enthusiasm, Y56 is the best colour. You'll have a blast in the Ignis, they're great craic :nice:
  11. Kipper

    Chipped P28 w/Boomslang OBD2A - OBD1 & EK9 Headlights

    Item for sale: Chipped P28 ECU & Conversion Harness Reputation: https://www.ek9.org/index.php?threads/kipper.38884/ Price: £210 delivered + Paypal fees Paypal: Yes Location: Newcastle Condition: Used, Good working condition Description: Surplus requirements from my B18C EG Racecar, I am sure...
  12. Kipper

    P73-003 JDM '96 Spec ECU

    Got one of these sorted, thanks for help!
  13. Kipper

    P73-003 JDM '96 Spec ECU

    All, Anyone have one of these they would sell before I take the plunge on eBay? Could be tempted with an aftermarket one at the right price too. Cheers Kris
  14. Kipper

    New R81 EG6 (update page 2/3)

    Very nice EG which are few and far between these days! Presume you'd be taking her to Mondello?
  15. Kipper

    Steering Wheels Ideas

    Momo Tuner 350mm or Momo Monte Carlo would be my choice.
  16. Kipper

    What size should I go for my TE37's ?

    7J ET35 on a 205/50 is about as far as you could go without arch work, but even then a 195/50 would probably be safer with the rear arches. This may be useful: https://www.willtheyfit.com/ Personally I reckon TE37 always look better in the smaller sizes, 15" would be my choice.
  17. Kipper

    B16B IACV Changed High Idle

    I would bet that there is an air leak with your symptom. Try get a torch in there and spray some wd40 or similar around the IACV and watch for bubbles. How I found an IM leak on my old d series. Check that the figure of 8 gasket is in good condition too if you have it off again, maybe run a...
  18. Kipper

    Mimms honda 26th july

    It's my local circuit and would like to be there but think it clashes with a race weekend unfortunately. Chuffed it's at Croft, great venue for this kind of thing.
  19. Kipper

    B18C EK9 Build

    Class build! Refreshing to see proper threads like this in the world of social media, gathering up genuine EK9 stuff isn't cheap in this day and age either. Car looked really good on those enkei es tarmacs.
  20. Kipper

    Mugen JDM DC2 Front bumper

    Sold!
Top