Search results


  1. Matt tynan

    Parts For Sale

    Price on defi afr gauge? and what ek are the speedo clocks from? Ek9 ek4 or just ej9 Cheers
  2. Matt tynan

    alternator connector issue's

    Glad you got it sorted, no bigger headache than wiring issues :angry2:
  3. Matt tynan

    alternator connector issue's

    I have a volt gauge in my own and it always reads 14 volts when running and never drops, my engine light comes on alright every now and than but a quick erase of the code and it doesn't come on for about a week or so, all i need is a jap fuse box with the eld and that shoukd sort out the light...
  4. Matt tynan

    alternator connector issue's

    I have pal, i just sourced myself the 4 pin connector and soldered it on, i just blanked off the eld wire and have no issues with charging
  5. Matt tynan

    Power steering belt?

    Thanks mate appreciate it :nice:
  6. Matt tynan

    Power steering belt?

    Hey lads, so ive just done a b18cr swap on my civic, the p/s belt never came with the engine so ive nothing to compare with, every belt i get is too short, twice i got a belt from my local motorfactors and one from japserviceparts, anyone know the belt number that ill need to get? Thanks in advance
  7. Matt tynan

    Ej9 b18c swap, dash loom questions

    Yep figured that out mate, i managed to get everything sorted, didn't need to get a obd2b loom after all only difference between the two that i could find was connector A was part of the dash loom on obd2b and part of the engine loom on obd2a, just a case of chopping the connector from the dash...
  8. Matt tynan

    Parts For Sale

    Hey mate by any chance would you have an obd2b engine loom for a facelift ek? Thanks
  9. Matt tynan

    Ej9 b18c swap, dash loom questions

    Alright lads i know this is been done too many times to be fair but i cant find the info that i need, so basically i have a 2000 ej9 1.4, ive swapped a b18c from a 98 spec dc2 and 4.4 lsd s80 box, my only question is that my own 1.4 dash loom has a plug that cannot plug into my p73 ecu because...
  10. Matt tynan

    My ek civic, kanjo style

    I ordered dark red sparco nets from demon tweeks, just aesthetics to be honest, i have a black and red colour scheme going :dance:
  11. Matt tynan

    My ek civic, kanjo style

    I had a few stickers on the doors but lets say the law wasn't too fond of it :(, I've a window nets on the way as we speak, bit by bit im seeing what i can get away with :))
  12. Matt tynan

    My ek civic, kanjo style

    Just a few pics of my kanjo styled ek, currently undergoing surgery (b18c r) :fapfap::ek9:
  13. Matt tynan

    B18c ek build

    Right lads, here is my civic ek with a b18c swap going on at the moment, currently just tightening up a few loose ends and should be up and running in the next few days :nice:
  14. Matt tynan

    Newbie from ireland

    Cheers lads, ill post up a thread of my ek im currently fitting a b18c r into :))
  15. Matt tynan

    Newbie from ireland

    Hey lads, ive been following this forum for a good while and decided to finally bite the bullet and sign up
  16. Matt tynan

    alternator connector issue's

    I have a jdm dc2 b18c, and the teg loom also is 4 pin, dont know much about mb6 to be honest, different specs for different countries i suppose really
  17. Matt tynan

    alternator connector issue's

    I actually figured it out mate, turns out even though both looms are obd2a the ek4 vti alternator is only a 3 pin, whereas the dc2 r has a 4 pin like the ek9, all thats needed is a vti alternator, my b18c is type r, definitely not US, thanks anyway for the reply mate appreciate it Edit: still...
  18. Matt tynan

    alternator connector issue's

    Hello lads, ive been following this forum for a good while now and decided to sing up, im in a bit of bother with my alternator on my b18c, basically i have a b18c from a 98 spec dc2 which as far as i know is obd2a, correct ne if im wrong, i also have an engine loom from a ek4 vti pre facelift...
Top