Search results

i have a question about the rear sway bar. I have the ek9 rear sway bar with OEM bushing and bracket and using the ASR subframe brace. I installed it on a USDM 1998 hatchback. After i installed it and make turns, sometimes i can hear creaking noises? its like its comming from the chassis or...

hey guys, today i finished installing my ASR subframe brace with the EK9 22mm sway bar using OEM bushing and bracket and endlink. THe problem is that the really long screw that ASR supplied for the LCA is kind of short. The screw on the right side for the LCA sticks out about .9cm at the other...

hey guys, how do you remove the axle back exhaust? I mean remove the side of the exhaust thats from the lower control arm to the rear. I am able to remove the 2 screws that connect the exhaust pipe but I am having trouble removing the 2 exhaust rubber hanger. How do u remove them?

hey do any of you know the Ek9 rear sway bar part #? I looked on the ek9 sway bar that i have and i see no part # or honda logo on it. Its all black so how can you tell if its real or not?

Hey I bought a used ek9 spoiler online and I don't know if it's real. The black mounting part underneath says Honda on both side with "up G-K" or something like that . But the actual white spoiler itself have no part # or Honda logo.how do I know if it's real? Wat is the ek9 rear upper spoiler...

guys how do u install ASR subframe brace? i have the manual from ASR but it doesnt show all the parts in the picture. on the EK, it have 2 kinda C or L shape bracket and 2 thin bracket. Is there anyone who can take pix of their ASR subframe on EK and show me please? like from multiple direction...

I have a USDM hatchback so there are no front or rear sway bar. I am going to add both the front and rear sway bar, but i only have the rear right now. THe front i cant get until 3 more months at least so if i install JUST THE REAR sway bar and having no front, will i get alot of oversteer? I...

hey when installing the subframe brace on a USDM hatchback, do i need to drill any holes into the chassis or subframe? Also will i need to do an alignment after installing the swaybar kit? (since you have to remove one side of the rear LCA to install on the ASR subframe).

Anyone have any review on the Blox endlink? I bought them today because im going to put on ASR subframe brace with the Ek9 22mm swaybar. Stock USDM rear LCA can be used right? However, when i install the swaybar kit, will i need to install camber or toe kit? (btw any review on the blox LCA?)

hey guys, is there a difference between the civic US, Canada, and Japan exterior door handle? I went to Honda world (in US) and they said its different but i dont know what the difference with the Japan one is. ALl i know is the Japan one cost more

can someone take a picture of their EK9 rear trunk hatch latch and show me how it looks? i bought a used EK9 rear trunk and i want to make sure it really is from an EK9. (the hatch latch is the part that locks to the car when u close the trunk)

hey does any of you have HID in your ek9 headlight? how does it work? i mean is there bracket or bras so the headlight would not have glare? In the US the headlights have covering over their bulb so it will not glare. However the ek9 does not have the covering over the bulb so i dont know if HID...

hey at night and with your headlight on (or there is light in front of the car), can you guys stand behind your car and see clearly through your rear windshield tinted window? Im asking because i notice some aftermarket tinted window cannot be seen through.

guys I have a USDM 98 hatchback and i just installed the rear trunk from an EK9. On my USDM there are about 7 wires (including 2 for the spoiler brake light and windshield spray). However on the Ek9 there is about 5 wires: black, red, green/white, blue/black, etc. Does anyone have the wiring...

hey whats the paint code for the ek9 in black?

hey is it possible to remove the Civic type R decals off and reuse it? or save it? because im getting the rear trunk repainted and new decals are like $60 USD

guys do any of you know the part number for the EK9 rear trunk (hatch glass, not the winshield but the trunk itself). Also is there a different between the yellow trunk part number compared to others? i have the yellow one so if i can get the part # for it, it will be great! thanks anyways guys...

guy can anyone post a tutorial or take pictures of how to remove the interiors so i can install the side molding on the outside? like take a picture of the area that need to be remove (like the screws or such). the thin side molding is the flat piece that goes from the fender across the door...

On a USDM Ej6, is it possible to add the front LCA and strut fork from the 99/00 Si USDM (Em1) or ek9 alone without the endlink and bracket?

guys I just made a weird discovery. When i was looking at my REAL REAR LIP for the preface lift ek9, INSIDE on one side i saw KANJI or Chinese word on it. I believe the lip is real because it is nicely painted black, Has the HONDA logo on the inside, has the time table chart with years in...