Search results


  1. C

    How to gain more tork at low rpm

    OEM one is 8kg is it?
  2. C

    Guys ... what's a Civic 1.6 ES?

    If not mistaken Civic ES model coming with 1.7 & 2.0 sohc engine. Not sure if u talking about the same model, bcoz asia market for Civic ES is after last model of EK's
  3. C

    How to gain more tork at low rpm

    How to "play" around during weekend track day if using auto trans :D
  4. C

    How to gain more tork at low rpm

    Can u recomended to me ideal flywheel weight to settle down my prob, how about 4.2 - 4.6kg flywheel? Another things my fuel consumption also very bad (full tank can reach only 280km)
  5. C

    How to gain more tork at low rpm

    I need to consider that bcoz I'm stuck in a very heavy trafiic jam about 3 hours in a day. Imagine if u reach 5km in 45 minutes
  6. C

    How to gain more tork at low rpm

    K20a better than b20 :)) ... But planning to remain my engine block as well
  7. C

    How to gain more tork at low rpm

    Currently I'm using b18c type R 98 spec engine in my ek. I felt loosing tork at low rpm (below 2k) & my current set up : 4.4 final drive, 3.7kg Toda flywheel & exedy clutch. Let say I want to remain my final drive & flywheel, any other things I should upgrade to increase my tork? I'm...
  8. C

    DC5 seat fit into EK9?

    Thx bro for ur info, btw can 2 door (EK9) rails fit into 4 door (EK4) ? Got friend with 4 door EK4 wanna change DC5 front seat also. Is it possible?
  9. C

    DC5 seat fit into EK9?

    Can DC5 Recaros front seat fit into EK9 ? Does modification required for railings? Is it true ek9 recaro railing can fit into DC5 front seat? Need confirmation please.
  10. C

    Best clutch for b series

    I've order a set from friend in Japan, shipment might arrive by a week. Thx for the info
  11. C

    Best clutch for b series

    Anybody try Spoon before? Comments?
  12. C

    over revving

    Have u checked the bearing I mentioned? If not mistaken got 2 bearing inside
  13. C

    over revving

    Happened to me also ... I suspected bearing inside the gearbox. At first I thought my clutch ... so change new one together with TODA flywheel but the prob still there. So just leave it like that at the moment
  14. C

    Sign of Crank Shaft Problem

    Actually, I swap B18cR 98 spec into my EK3 chasis few months back & dunno whether crankshaft still in good condition or not. But if its main bearing inside the gearbox got problem ... what is the sign? Coz during traffic jam, when I slowly release the clutch pedal ... can feel jerking and rpm...
  15. C

    Sign of Crank Shaft Problem

    Do you mean engine oil or transmission oil? Never for engine oil but there 1 time for transmission oil due to leak at drive shaft oil seal
  16. C

    Sign of Crank Shaft Problem

    Went to my mech today bcoz my engine idling drop almost 0 & jerking a bit. He checked and mentioned that my crankshaft might having a prob same with transmission main bearing. What is the sign of these both already not in good condition.
  17. C

    CEL During Low Rev To Mid Rev

    CEL = Check Engine Light
  18. C

    CEL During Low Rev To Mid Rev

    I'm using B18cR engine with 98ecu, ek4 engine harness wiring ... Sometimes the CEL appear during low rev to mid rev (1500 - 3500 rpm) specially after the car parked for a night and first travel I made. I have asked this question before at another forum and some says might be the ECU ... some...
  19. C

    "ASK" will it fit if i swap to oddysey RA6/RA6 brakes?

    Do you mean caliper or brake disc? Currently I'm using RA6 brake disc with RA6 caliper for front and h22a brake and disc for rear. But its better look for NSX-R caliper and RA6 brake disc but its required clearence on your rims, if not mistaken you need to have at least 16" rims set. Need...
  20. C

    VI-RS Exterior

    Anybody here using VI-RS exterior ... whats the differ between VI-RS 99 spec and JDM EK9 99 spec
Back
Top