The magnet broke in the gearbox and destroyed some of my bearings,
Spent whole day with another magnet and a little flat filler gage
Fishing the bits out ,
It was everywhere, DO NOT USE EVER .
Only about 20km on this clutch major failure with multiple springs,
The clutch itself looks very new and fresh
What's the chance of refund from warranty?
Can anyone tell me if my readings are good or bad is my o2 sensor slow ? Because I changed it for a stuck o2 sensor that was stuck at 0.18v , the o2 sensor I'm using is a spare one I had not new ,thanks very much ☺ the video clears up about 15 seconds into it.
Look for double core rad if anyone has one for sale be it from a Irish seller or from our cousins across the water UK
Let us know how much it will cost posted from UK . From Irish seller iv a courier service to collect it .
P.s
It's for a gt starlet so one from them will also do .
Thanks a lot.
http://jp-carparts.com/
This site is very cheap for parts ,I thought I'd post it here for others,
Input shaft bearing 18 euro , think it's 60 euro for input shaft bearing and seal and right and left drive shaft seal for gearbox,
That's 60 euro delivered.
Ok my mot / nct failed me on reading of 1.07
All other readings are low idle 800 rpm Co 0.00 vol% HC 11 ppm
High idle 2.760rpm lambda 1.07 Co 0.00 vol% HC 12 ppm
Now my dataloger says my lambda is good jumps from 08 to 90 with nice wavelength.
Would that reading be saying that I have a...
Looking for rear left caliper if anyone has one ,
Standard caliper for civic coupe vti , sir , or whatever fits ,
Thanks guys .
Having a nightmare of a time with it ,
I was doing valve adjustment yesterday and have just noticed I'm missing a cam cap bolt also I need a valve cover stud
If anyone can help that would be great ,
as seen ,
Looking for the top piece off the centre armrest from eg9 ,
It's just the little square plastic bit ,
It's for a British Facebook friend of mine if anyone can help me/him
It would be great , he has Paypal and is willing to pay the price for that piece.
IT'S THE TOP BIT OF THE ARM REST
Looks like I can spend my money in the UK now and get a good deal .
Or take a spin up north to buy Xmas stuff ,
The UK pound is at a good rate for us euro bound folks
Ok I started to get break shudder on the left front side ,
Before this happened I greased up the slider pins ,
But I may have put to much in ,
Just now I wiped of all grease and rechecked everything is good ,
All bushing are good ,tie rod is good , engine mounts are good ,
Drive shaft is good ...
Just thought I'd post this up here , nothing to do with me it's just on my local Facebook page
https://www.facebook.com/groups/1417994995116207/permalink/1728578047391232/?sale_post_id=1728578047391232
I'm looking for a wheel bearing and am wondering if this is the right
Size for my car
98 civic 1.6 sohc vtec is the body code
Has abs and 4×100
Thanks in advance guys .
WHAT ABOUT THIS ONE ALSO ?