Search results


  1. T

    Fuel pump kill switch

    Im going to install one of these but I'm unsure if its as simple as i presume... Can i simply cut the wire going to the fuel pump fuse and add a switch on that wire?
  2. T

    2.5" mid pipe

    Hi guys Ive just got a new backbox and need a 2.5" b pipe/mid pipe to go with it? let me know what you've got.
  3. T

    Japfest track time

    Anyone booked up for a session?
  4. T

    Stem seal replacement.

    Has any One replaced stem seals with the head still fitted. I have a b20vtec and really don't wanna fork out for another ge headgasket. I've seen a few how to's but just wondering if anyone has tips. Like can the valves fall down once the springs released?
  5. T

    s9b lsd into y21

    Can this be done? If i buy a s9b box what do i need to swap into the y21 for the lsd to fit? Or with theses 2 boxes what would be the best setup?
  6. T

    members advertising on behalf of other people

    Is this allowed? I have bought something off here which was not complete and have now found out that it was advertised on behalf of what seems to be another member. So I now have seat rails with no belt buckles! Why cant people just sell there own stuff and explain whats included.
  7. T

    Need my b20vtec faster!!!

    Ok so ive got a b20vtec and im not sure what the next step should be to make it quicker. Its fairly basic so theres a bit i could do..... but what? spec is: b16a head b20b stock block itr airbox 2.5 tanabe 4-2-1 exhaust manifold 345cc injectors 2.25 full system. its got stock clutch and...
  8. T

    my b20vtec ej9 build

    Thought i would do a build as ive been on here a while but never started one. So here goes...... I bought the car in standard form for a very reasonable price about 6 years ago now. Kept it standard for a while and then started to get bits like wheels and lips and so on. Engine stayed stock...
  9. T

    tyre width

    Would 195/50/15 michelin tyres be ok on 7 inch wide wheels? enkei rpf1's to be exact? Already have these tyres and dont really want to buy new ones if i can help it...
  10. T

    Crv dials into ek

    Will crv 2001 dials fit and work into my 1997 ek? I have read that crv dials are a straight swap but i just want to check. Also i dont have a petrol light on my car (as its originally a ej9) so what would i need to get one working if the dials do fit?
  11. T

    Oil pressure dropped!

    The oil pressure has dropped on my b20vtec, i havnt had it running that long and it has dropped quite quickly in time. More so in the cold weather. When i 1st got it running it used to read 50-60psi on cold start then once warm 15psi on idle and 60-70psi over 3k but now its 30psi on cold...
  12. T

    Vtec pressure?

    I have had to bypass my vtec pressure switch to run my b20vtec, so I have fitted an oil pressure gauge so I can keep an eye on it. Does anyone know what my pressure should be before I safely use vtec as with no switch my vtec works from start. Any help?
  13. T

    Revving troubles

    I have a bit of a problem with my new b20vtec . What happens is, when im in 5th gear cruising and then i put my foot down and the revs go up to about 3.5k but pulls normal. ( like the car dont really go faster but the revs go quickly.) Then when it gets to 3.5k it drops back down to about 2.5k...
  14. T

    registering new engine

    ive just put a different engine into my ek and was wondering how other people went about registering theres? what do i need to send off to the dvla, I have been told proof of purchase needs to be on a headed piece of paper from a garage? What if i didnt buy it from a garage? Anyone got any...
  15. T

    Ek9 rear calipers with mgzs discs

    Does anybody know if this works? I want to put ej9 rear calipers on my 4x100 Ek but I'm stuck for what discs to use. I know mgzr ones will fit the hubs but will they suit/line up with the discs as mg discs are 260mm not 262mm like ek9s. Will that 2mm be a problem or does anybody have any other...
  16. T

    Fuel pressure

    I have a b20vtec with prelude 345cc injectors and a fpr. Was just wondering what pressure you can suggest I run at idle. At the minute I'm running it at 38.
  17. T

    rear calipers for ek

    i need some rear calipers for my ek. 242 or 262, i have 4x100 hubs so can i get ek9 calipers and other discs to suit? also would like handbrake cables please!
  18. T

    brake pedals really hard

    just swapped 282s and ek9 brake servo and master cylinder and my pedal is REALLY hard and brakes are crap. what could this be?
  19. T

    engine code 7.

    my b20 swap is throwing code 7. I know this is throttle position sensor. i took the tps off to clean the throttle body before i built the engine, could this have caused the problem, i have tried adjusting it but the code just keeps coming! Any ideas?
Back
Top