1998 Civic Type R, manual to power door swap questions


dropnotch

Member
Joined
Sep 20, 2010
Messages
53
I'm currently swapping from manual doors to power ek9 ctr doors. All the wires seem to be in the car already, 19 were in the cars original harness as well as the door harness of the power doors. All power fuses are apparently standard in ctr'ctr's (40amp under hood, left/right 20amp under dash).

I plugged both doors up to the cars harness and turned the ignition on but the power windows don't work. Mirrors functioned as normal (minus power folding on new doors cause I haven't wired them in yet).

What else do I need to do to make the power windows work?
 


b16 mini

Ek9 obsession
Staff member
Donator
Joined
Mar 10, 2008
Messages
3,207
Car(s)
1997 Ek9,1996 ek4 siR, 1972 b18c4 mini
I'm sure there should be a relay in the engine bay fuse box, check if that is there,

Do you have a multi metre to check for power to the switch?
 


dropnotch

Member
Joined
Sep 20, 2010
Messages
53
I got them working. There was a relay missing in the under dash fuse panel. Put the relay in there and they work perfectly! Thank you for responding!
 


Top