I'll soon have 2 genuine, JASMA approved, Mugen twinloop catback exhaust systems for sale (2 midsections and 2 twinloop back bokes)
Both systems come with official Mugen and JASMA documentation/certificates and original fittings etc.. They are both the same, but 1 is brand new & boxed, and the other is used!!
The used system is currently fitted to my car. It is in extremely good condition.. the back box is perfect and the mid section has a slight scrape on the midbox (no dents at all). The scrape would flat and polish out if the next owner desires, and the whole system would polish up to an 'as new' finish if you want to spend time doing it.
I recently paid £450 + postage for this from Jap Performance Parts, so open to offers around that..
The new ststem is perfect.. never fitted, no scratches or dents etc.. Photos will be uploaded of both systems soon. I'm unsure as to the value of this so i'm open to suggestions and offers.
Both systems will be available as of next weekend. Pick up is available from Lichfield (WS14) or Kings Lynn (PE33) areas
Note...
Mugen do a EK4 system aswel with 2.25 diamerer pipe to work with the original ek4 system. However, the ek9 systems use 2.5 diameter piping so the back boxes will only fit the ek9 or mugen midsections. Also, the tailpipes are different on the ek4 - ek9 back boxes.. the ek9 one compensates for the stock ek9 rear splitter with regards to length and position. If you have a ek9 splitter on your ek4, you will need an ek9 system, or the tailpipe touches and does not exit past the splitter properly.
Cheers, Craig
Both systems come with official Mugen and JASMA documentation/certificates and original fittings etc.. They are both the same, but 1 is brand new & boxed, and the other is used!!
The used system is currently fitted to my car. It is in extremely good condition.. the back box is perfect and the mid section has a slight scrape on the midbox (no dents at all). The scrape would flat and polish out if the next owner desires, and the whole system would polish up to an 'as new' finish if you want to spend time doing it.
I recently paid £450 + postage for this from Jap Performance Parts, so open to offers around that..
The new ststem is perfect.. never fitted, no scratches or dents etc.. Photos will be uploaded of both systems soon. I'm unsure as to the value of this so i'm open to suggestions and offers.
Both systems will be available as of next weekend. Pick up is available from Lichfield (WS14) or Kings Lynn (PE33) areas
Note...
Mugen do a EK4 system aswel with 2.25 diamerer pipe to work with the original ek4 system. However, the ek9 systems use 2.5 diameter piping so the back boxes will only fit the ek9 or mugen midsections. Also, the tailpipes are different on the ek4 - ek9 back boxes.. the ek9 one compensates for the stock ek9 rear splitter with regards to length and position. If you have a ek9 splitter on your ek4, you will need an ek9 system, or the tailpipe touches and does not exit past the splitter properly.
Cheers, Craig