3" intake pipe


LoganK

LoganK

KSWAP THE WORLD
Joined
Jun 7, 2011
Messages
1,995
Going to buy a velocity stack and blox filter. Need an intake pipe and can't seem to find any ones that will do the job.

Picture below is for reference to the length/position it needs to be :)

Any help would be great!

 
I couldnt find any wen i looked. They dnt seem to be long enough to reach the corner! How about a custom one? Good luck with the search.
 
Yeah all the ones I have found seem short! Can't even find any 2.75-3" internal diameter alloy pipe to buy! I would buy a decent length of it and make it myself if I could find the pipe lol
 
If you want to make up your own intake arm you can buy 3" intercooler pipe kits, the kit will normally include various lengths and angles of pipe
 
@jesse888 I think the first link you sent is the best bet! Just buy 1m and bend/cut it to what I need!

@Vtec6000 was looking at intercooler kits but would work out quite expensive just for one piece of pipe, going to buy the pipe and do it myself I think :D
 
Yeah. A 45 degree joiner and some fancy heat reflective tape it I'll look the dogs danglies!
 
Doing something similar on the ep3. I am just ordering some 3" pipe and cut to suit.
 
wishy said:
Doing something similar on the ep3. I am just ordering some 3" pipe and cut to suit.
Click to expand...

I'm waiting on a company getting back to me about a 3" intake pipe if no luck with them (will probably hear back mon/tues) I think I will do the same!
 
Just remembered half my intake is a 45degree 3" pipe!
Was faffing with it today.
The piece going under the front panel.
 
Haha nope!
Fancy aluminium piece no less.
 
You must log in or register to reply here.
Back
Top