Alignment (Tracking) Specifications

[shah_jee]

I have searched everywhere but unable to find the alignment settings for the ek9. The garage then tracked my ek9 to a standard honda civic 1996-2000 spec. Does any1 have any more information on this?

 

[switch9]

I have searched everywhere but unable to find the alignment settings for the ek9. The garage then tracked my ek9 to a standard honda civic 1996-2000 spec. Does any1 have any more information on this?

Well, this is something I would like to know too. Because I really don't think that the EK9 will have the same alignment values than an "normal" 6th gen civic (or even an Vti).

I can look up the values for a normal civic for you if you want ?

 

[Dino-Spumoni]

http://www.ek9.org/forum/suspension/2291-camber.html
This is the stock alignment range. I answered a few more questions in the above thread.

front left/right:
range
camber: -1.5° --> 0.5°
caster: 0.2° --> 2.2°
toe: -0.08° --> 0.08°
sai: n/a
turning angle diff.: -7.50° --> -3.50°

front:
range
cross camber: n/a
cross caster: n/a
total toe: -0.16° --> 0.16°

rear left/right:
range
camber: -2.0° --> 0.0°
toe: 0.04° --> 0.16°

rear:
range
total toe: 0.08° --> 0.32°
thrust angle: n/a

 

[shah_jee]

Great

Checked my results of the alignment tracking (lab) and it fits into the ranges.

My 2 rear tires had to be adjusted, causing also the front driver to later be adjusted during the lab. Before this I went through a pair of rear tyres twice. and some inside wear on the driver tyre.

Alls good.