B-series (M-Factory S80, HA P28 ECU B18C, J's intake etc, Radiator...)


Kipper

Well-Known Member
Joined
May 27, 2008
Messages
2,163
Alright folks, beginning to list stuff B-series stuff here from the Racecar. FS thread is a WIP for the moment.

All stuff is located in Newcastle, willing to post everything at buyers cost, although would prefer collection on box.

Item for sale: '96 S80 Gearbox
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £1000
Paypal: Yes/Cash
Location:
Condition: Fantastic condition, no crunches, grinds or noises.
Description: '96 S80 LSD Gearbox in fantastic condition, no crunches, grinds or noises. M-Factory 5.167 final drive fitted, tops out at 130mph. Full OEM/NTN bearing set incl. diff bearings fitted at the same time as final drive along with new OEM Driveshaft seals, <500miles old. 3-4 synchro's replaced just before my ownership of the box and re-inspected during rebuild. Work carried out by HSP in Darlington. Gold magnetic plug always used in my ownership and oil changed very regularly. The final drive transformed how the car would pick-up. £1200+ was spent on the gearbox alone and as I mentioned it has been used <500miles since.
Pictures: To follow

Item for sale: HA Motorsports P28 ECU with B18C Henry Roy map w/ OBD1 - OBD2a Harness
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £350
Paypal: Yes/Cash
Location:
Condition: Bought new in 2020
Description: Bought the ECU new from Tegiwa and had Henry map my stock B18C with J's intake and Tegiwa (Toda rep) manifold & 2.5" Catback. It is a healthy engine low-ish KM JDM engine and made 191bhp on a stock map, Henry pulled 13bhp out of it making it 204bhp (Some RR's will read higher than this no doubt)
VTEC @ 4.5K, Stock 8.8k Rev limit. Car felt real perky after the map!
Pictures: To follow

Item for sale: Genuine J's racing FRP intake (Slug/Whale)
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £120
Paypal: Yes/Cash
Location:
Condition: Used, some marks, filter is in okay condition. Clean but not new by any means.
Description: Has some heat barrier tape fitted. Comes with a securing bracket and couple to throttle body
Pictures: To follow

Item for sale: OEM Honda 4.4FD & Counter shaft
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £150
Paypal: Yes/Cash
Location:
Condition: Great condition, no chips or excess wear
Description: Removed from the '96 Gearbox, Can be used to fit a Type R Helical LSD to a non Type R gearbox I believe
Pictures: To follow

Item for sale: Tegiwa High capacity (Large header) DC2 Radiator, Full width. Includes Aeromotive? slim fan with OEM plug attached.
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £100
Paypal: Yes/Cash
Location:
Condition: Bought new in 2020, Unfortunately it had a mild weep from one of the water channels which I had to get repaired by a specialist, suspect it was a manufacturer fault. Has some small marks etc... But overall a good radiator with great efficiency.
Description:
Pictures: To follow
 
Last edited:
Gearbox & 4.4 FD sold.

Also have a JDM B18C-R ECU (No immobiliser/200ps) - £90 + Post

UKDM B18C-R ECU - £40+ Post

Integra B18C-R Engine harness minus the starter cable - £90 + Post

Not very old Exedy B18C Clutch kit with Genuine Honda Nachi release bearing (Carried as a spare for the racecar) £60 + Post

OEM Honda B18C Headgasket BNIB - £55 + Post

P28 Above reduced price £210 + post without chip, £250 + post with chip (Have an OBD2A - OBD1 conversion harness available too)

Can message me for whatsapp or email.

Cheers
Kris
 
Alright folks, beginning to list stuff B-series stuff here from the Racecar. FS thread is a WIP for the moment.

All stuff is located in Newcastle, willing to post everything at buyers cost, although would prefer collection on box.

Item for sale: '96 S80 Gearbox
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £1000
Paypal: Yes/Cash
Location:
Condition: Fantastic condition, no crunches, grinds or noises.
Description: '96 S80 LSD Gearbox in fantastic condition, no crunches, grinds or noises. M-Factory 5.167 final drive fitted, tops out at 130mph. Full OEM/NTN bearing set incl. diff bearings fitted at the same time as final drive along with new OEM Driveshaft seals, <500miles old. 3-4 synchro's replaced just before my ownership of the box and re-inspected during rebuild. Work carried out by HSP in Darlington. Gold magnetic plug always used in my ownership and oil changed very regularly. The final drive transformed how the car would pick-up. £1200+ was spent on the gearbox alone and as I mentioned it has been used <500miles since.
Pictures: To follow

Item for sale: HA Motorsports P28 ECU with B18C Henry Roy map w/ OBD1 - OBD2a Harness
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £350
Paypal: Yes/Cash
Location:
Condition: Bought new in 2020
Description: Bought the ECU new from Tegiwa and had Henry map my stock B18C with J's intake and Tegiwa (Toda rep) manifold & 2.5" Catback. It is a healthy engine low-ish KM JDM engine and made 191bhp on a stock map, Henry pulled 13bhp out of it making it 204bhp (Some RR's will read higher than this no doubt)
VTEC @ 4.5K, Stock 8.8k Rev limit. Car felt real perky after the map!
Pictures: To follow

Item for sale: Genuine J's racing FRP intake (Slug/Whale)
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £120
Paypal: Yes/Cash
Location:
Condition: Used, some marks, filter is in okay condition. Clean but not new by any means.
Description: Has some heat barrier tape fitted. Comes with a securing bracket and couple to throttle body
Pictures: To follow

Item for sale: OEM Honda 4.4FD & Counter shaft
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £150
Paypal: Yes/Cash
Location:
Condition: Great condition, no chips or excess wear
Description: Removed from the '96 Gearbox, Can be used to fit a Type R Helical LSD to a non Type R gearbox I believe
Pictures: To follow

Item for sale: Tegiwa High capacity (Large header) DC2 Radiator, Full width. Includes Aeromotive? slim fan with OEM plug attached.
Reputation: https://www.ek9.org/index.php?threads/kipper.38884/
Price: £100
Paypal: Yes/Cash
Location:
Condition: Bought new in 2020, Unfortunately it had a mild weep from one of the water channels which I had to get repaired by a specialist, suspect it was a manufacturer fault. Has some small marks etc... But overall a good radiator with great efficiency.
Description:
Pictures: To follow
Can I see the picture of the js intake if you still have it ?
 
Can I see the picture of the js intake if you still have it ?
6E374E08-82D7-4510-8EEF-11BCF543EB83.jpeg
 
Back
Top