Buddyclub N+ settings


saxophonias said:
In front it is just a little from the upper point i can put them. For the rear i made some custom top mounts from teflon so as to be able to increase heght cause it was really low.
bc1eu1.jpg

I couldn't tell you what happens with 16inch rims!14inch is to small to have these worries. The only problem i had was with ground clearance
Click to expand...

Wells mine is 16inch and man my new tyres looks pretty bad its scratch bad. Id set damper from the softest up by 5 and dang it still scrapes like no tomorrow.
 
Just wondering does anyone have these problem with the N+ for mine 1 of my front has 15 clicks and the other has 16 however i believe they should have 16 as it says on the buddyclub website. My rear 1 of them only has 12 and the other one 14 hmmm any ideas?
 
Steven it is very weird yours have only ten. Unless it is a prior model then there is a problem and at this case you should claim a refund or repair. It is clearly stated that there are 15 clicks.. An93l you should do the same thing. Maybe they gave you a faulty one. Mine have 15 clicks whatsoever. I
 
Can you have stock height with these with out modifying (on a ek9) ? I dont like lowering cars
 
Last edited:
also just to add some info, there are 3 styles i believe.
Junior spec, P-1 Spec, and N+ spec.
i personally have junior spec and P+1 spec.
i know that the P-1 have 15 clicks and the junior spec have 6 or 8 cant remember.
 
The N+ is too low for stock height ive tried adjusting it to the highest and its at least a 1.5inch drop from my stock ek4 sussy.
 
Last edited:
have you got any alignment numbers? If there is a wear issue then your numbers must be really high
 
I gave buddyclub a call today and ask and they say that the suspension has 15 clicks at least however can sometimes varies and that is normal to up to 17 or 18 clicks.
 
hey guys is it worth getting a camber kit to straighten up the wheels??? does anyone here do it? Or just leave it in an angle cause i heard its good for cornering.
 
it depends on your alignment numbers. If they are in the acceptable range or even a bit out of them leave it as it is.
 
Can some body please post up a picture of their car with the camber kit on please will be much appreciated thank you.
 
I have the n+ springs on my ek9 wondering if anyone Could tell me the length and width of the front springs as my drivers front has snapped. I have rung buddyclubuk and they said they don't sell the springs separately and can't tell me the size
 
Yeah I Will have to I was just wondering if anyone knew to save a bit of time
 
The springs on mine are 2.5inch internal diamiter 7 inch long and 10k. Just in case this is any help to someone
 
You must log in or register to reply here.
Back
Top