DC2 (Kswap) racecar


typeR.jdm

New Member
Joined
Aug 26, 2010
Messages
61
hello forum members,

here is my 97 Integra TypeR with couple of engine mods and chassis mods, but over couple of months it will go through Kswap and few more chassis mods


13082010242.jpg


20082010302.jpg


20082010303.jpg


Engine and Gearbox :
Hytech Big tube rep Manifold 2.5"
Custom decat pipe
Mugen Twinloop
Aircon Removed
PS removed and pulley changed with N1
Injen long arm induction kit
Odessey Extreme 25 Battery
Tegiwa Cooling Plate
Avid 5 Engine mount kit
Energy Shifter Bushings
Engine and gearbox megnatic sump Bolts


Brakes:
Front Nsx twinpots 282 discs using 282mm x 28mm Legends Discs drilled to 4x114.3
262mm rears using mb6 discs
AP Racing 550 Brake Fluid
Hel Brake Lines
ABS Removed

Chasis:
Standard front and rear strut brace
H Brace
C pillar bar
Front Skunk2 Camber Arms
Blox Rear Lca's
MiesterR Rear Camber Arms
MiesterR Toe Arms,
MiesterR ZetaR Coilovers
Undersealed with Hammerite waxoyl
PasswordJDM Tow Hooks

Interior:
Corbeau Recliners
Deepdish Momo steering wheel
Type R mats
Tegiwa Spoon Rep Alliminium Gear Knob
98 spec gear Gaitor

anyway
now what i have already managed to buy related to kswap and turning it into a racecar,

K20a2 engine which came with Excedy flywheel and Clutch but flywheel will go through a lil skim and clutch will be replaced with something nice and better
engine.jpg


DC5 lsd gearbox, pics a lil too close but its just too show its got lsd lol
Gearbox.jpg


and now for the kswap parts am half way through a deal right now so once that gets sorted all i need after that is an FPR and inline fuel filter or i might use the stock one as its only been on there for like 120 odd miles

but anyway here are the bits am looking to buy:


Hybrid Racing Manifold
Hybrid racing conversion harness
DSS 4.1 Drive-shaft
Hybrid Racing engine mount
Hybrid racing Radiator
Hybrid Racing, fuel rail with lines
Hybrid racing Clutch lines for RHD
Hybrid racing Shifter Cable
Karcept shifter conversion box with DC5 OEM shifter box
Karcept PS and ac Delete kit,
Karcept Throttle cable and bracket
Tanabe ultra medalion Exhaust

but a this is a racecar so i started ordering few bits to make it up to race stds
so OMP boltin Rollcage is on the way and so Is side mounted Sparco Circuit seat is on the way too, i am hoping to find myself a takata harness but only the real deal
and after all that craps here the whole cutting and grinding will start for loosing bit of weight on this baby

so Most of the b18c engine parts will be up forsale soon so watch out lol
 
:bow: amazing dc2! congratulations
 
Lookin good! BTW if you need any help getting your K swap parts, we offer almost everything on your list and ship international :)

Also, I see the Karcepts shifter mounting kit on your list... You should check out Hybrid's newest K series shifter. We were fortunate to get several of them in from their first order..Hybrid Racing K Swap Bolt In Short Shifter Box | HA Motorsports

Did you get the PRB ecu with your swap, or have you been able to locate an RSX-R ecu??? Just curious, didn't see it on your list or in the pics...

- Matt
 
Lookin good! BTW if you need any help getting your K swap parts, we offer almost everything on your list and ship international :)

Also, I see the Karcepts shifter mounting kit on your list... You should check out Hybrid's newest K series shifter. We were fortunate to get several of them in from their first order..Hybrid Racing K Swap Bolt In Short Shifter Box | HA Motorsports

Did you get the PRB ecu with your swap, or have you been able to locate an RSX-R ecu??? Just curious, didn't see it on your list or in the pics...

- Matt

well am kinda still looking for the following so if you can give me a price and a quote on shipping i might consider buying the Hybrid Racing K Swap Bolt In Short Shifter Box too from you but give me a price including the shipping for the following


Karcept Throttle cable and bracket

Karcepts A/C and P/S Removal Kit with Alternator Relocation (K20A,K20A2,K20Z1)

Hybrid Racing K Swap Bolt In Short Shifter Box
 
engine conversions been put on ebay now, so hopefully once its sold will be ordering some more parts for the raceteg:drool:
 
This will be mega mega Im sure.. looking forward to the finished outcome:nice:
 
This will be mega mega Im sure.. looking forward to the finished outcome:nice:

i am breaking this car now lol,

but i got something better lined up now, just need picking up next month sometime, will for defo post some pics up when i get it
 
thats a shame your breaking the car looked like it had a lot of potential to be class :) what you getting instead?
 
i will be watching this thread :) im going the same direction with my ek4 trackcar ..... you say your getting a "Karcept PS and ac Delete kit" ?? im presuming this is to get rid of the not needed aircon and sorry to sound dumb but if you have no power steering..... do you have to get another rack or can you use the existing with no p/s ???
 
thats a shame your breaking the car looked like it had a lot of potential to be class :) what you getting instead?

DC2 which is already track and k20 prepped

i will be watching this thread :) im going the same direction with my ek4 trackcar ..... you say your getting a "Karcept PS and ac Delete kit" ?? im presuming this is to get rid of the not needed aircon and sorry to sound dumb but if you have no power steering..... do you have to get another rack or can you use the existing with no p/s ???

you can use the same rack either loop it or get a spare clutch reservoir to keep the fluid running

aww man, you not going to finish it? :(

will be a beast if you do.

the car is gone well most of it, but i have managed to get myself a nice track and kseries preped dc2

too bad you dont finish it, i used to dream about a dc2 k20 :D
dont worry mate, got another ready



will update the thread once i get it delivered to me
 
Nice one mate , this is what im after for my next car :D
 
Back
Top