Eh2 Nicks D16Z6 Eg Hatch Build


Eh2Nick

New Member
Joined
Jan 26, 2017
Messages
3
Whats up guys, after having some trouble with a moderator at hondatech one of my buddies recommended that I come here, so here I am. Im going to start off going through the few stages that this car has gone through leading up to where it is now. I bought my 1992 Civic dx pretty much bone stock except for a ebay catback. The exterior needed a little work.
16344425_1553021408047431_1039993607_n.jpg

This is the car the first day i bought it.

From here I went and installed my function form type ones from the totaled integra that I bought for the gsr swap.
16343812_1553021404714098_1614773111_n.jpg

Not pretty but much better than before

Fast forward a few weeks from there(i had rattle canned the car black just to make it all one color) I was on my way to school when another kid rolled a stop sign and I had no choice but to hit him. I was no happy about this because this would have been the second hatch I totaled but after a little talk we decided to not go through insurance, as the only real damage was to the hood and rad support.
16244417_1553021401380765_1457522376_n.jpg


Now fast forward another few weeks again and we had it all sorted out, he gave me the money i needed to fix the car and everything went together pretty smooth.
16344402_1553021394714099_1736578644_n.jpg


Shortly after this I finally got around to putting the gsr swap in the car with a b16 trans that i had laying around, and it was fun for a while til it picked up a misfire and low compression in cylinder 3. heres how the car looked at that point in time.
16326005_1553030174713221_893913752_o.jpg

Now Im going to explain where the car is right now and what my plans are. After having trouble with the gsr, i decided that i wanted to try something a little bit different and I picked up a d16z6. I had been reading about vitara builds and the numbers that people were getting out of these single cams suprised me so I decided to give it a go. The goal here is go fast for somewhat cheap and somewhat reliable...well see how this goes. Here is a list of what I have so far
D16z6/Ex trans
Eagle rods
75mm Vitaras
Brian Crower Valve Springs
Arp Headstuds
Acl bearings(Main and rod)
Ebay 750cc injectors
Ebay log manifold
Spa t3/t4 60 trim turbo
ebay wastegate
Giant ebay intercooler

I am still piecing together stuff for the turbo kit, things like map sensor, fuel pump and a bunch of little odds and ends. I wont be using all the ebay parts indefinitely, im really using them to just get the car on boost and ill upgrade them as I go. With this setup im aiming for about 400whp. I will be doing all the tuning on the car using crome, I have done a fair amount of research on tuning and I have a few buddies with tuning experience so I will be reaching out to them for advice. Heres a few pictures of the motor, parts and car how it is currently.

The car is painted Type r yellow, Did it myself with a spray gun I got at walmart. Didnt come out too bad for my first time painting a car.
16244152_1553021374714101_1905576984_n.jpg

Heres all the goodies when they came in.
16325550_1553021351380770_2107423511_o.jpg


Vitara on the eagle rod. Looks pretty good to me
16325756_1553021348047437_2143739667_o.jpg



Heres The little 60 trim that ill be using.
16325846_1553021364714102_829998763_o.jpg


Pistons and rods in the block.
16326333_1553021341380771_40940500_o.jpg


Here the giant intercooler i was talking about. Still need to build some brackets to support it from underneath, ill post a pic whenever i get around to doing that.
16357629_1553043288045243_981598958_o.jpg





Here is the motor how it is currently. Im using a fel pro headgasket which i have heard mixed reviews about but ill see how it holds up. Also picked up a vms cam gear. At this point itll only be a few more weeks til i pick up a clutch and then ill be dropping it all in the car. Ill be working on the car a little bit once it stops raining here so ill try to post an update every so often until Im ready to drop it in the car.

16325686_1553039064712332_220550829_o.jpg
 

Attachments

  • 16244417_1553021401380765_1457522376_n.jpg
    16244417_1553021401380765_1457522376_n.jpg
    100.4 KB · Views: 352
Welcome to the forum, nice project :nice:
 
Ok small update, went to fit the ebay injectors and ran into a small problem, the fuel rail wont go all the way down with the new injectors, it seems like theyre a little bit taller than the oem injectors. Anyone ever run into this problem?
16466631_1559620570720848_1619102142_o.jpg


Also I was looking for ways to run my turbo drain line into the oil pan and I decided I would try out a -10an bulkhead fitting, im hoping that it seals well and doesnt leak otherwise ill need to look at other options.
16442950_1559620524054186_1534740066_o.jpg

Thats all for now, should be getting the motor in pretty soon and then ill be out to seat the rings with the car n/a. After that ill finish up the turbo kit and see how it does.
 
16990998_1587866954562876_262879817_o.jpg
17016605_1587867277896177_920474637_o.jpg
Update 2/27/17- I got a fair amount done in the past week or so, my action clutch stage 4 4 puck unsprung clutch came in. I also got around to putting everything together and dropping the motor in and with the help of a friend it went in very smooth. I ordered a few things which should be here this week, I ordered a intake manifold gasket, valve cover gasket, charge piping, downpipe, and about 45 nuts and bolts from honda so i can get everything put together. Once everything is together ill be ordering a moates ostrich so i can get out and do some tuning on wastegate until i buy a 4bar map sensor. Ill post a few small updates this week as i get some work done on the car but for now im just waiting for parts.
 
Back
Top