EK & EJ Exhaust Fitment

[Sleeper Status]

So I did a little poking around but didn't find much on this topic. I wanted to know if the EK Exhaust would fit on an EJ. IIRC the Back Box should fit just fine correct? Now does the B-Pipe fit Also? I know the EJ's are a tad longer due to being a coupe so would the CAT/Test-Pipe need to be lengthened from it's Stock size? I ask because I would like a full Spoon Exhuast set-up using there 4-2-1 Header, B-Pipe and N1 Back Box. I don't want to use the Omni or any Adj. length Test-Pipe because I know that will cause Raspy-ness in the Exhaust Note. I will have HyTech Make a Custom Length Renault 2.5" CAT if they don't already make them in the required Length.

Also does anyone know if the Spoon B-Pipe and N1 Back Box are 2.5"? I don't like bottle necking my exhaust by having a 2.5" Collector/Header outlet to a Smaller sized 60mm (2.36") Exhaust.


Thanks for any help

 

[rayy]

im not sure if they ej will fit the ek's but the spoon n1 piping is 2.5 but at the flange it bottled necks down to 2.25 so im geussing the spoon b pipie will be 2.25

 

[jordy93]

the civic coupe is chassis code em1, not ej.
ej = ej9 which is the 1.4 ek shape civic

 

[Sleeper Status]

Oh sorry the Coupe's here I believe are Chassis'd as EJ's with the EM1 being our 99-00 Coupe Si.

So I guess I'll have to re ask does the EK9 Spoon B-Pipe fit the EM1, if mods are needed what are they?


Thanks

 

[Sleeper Status]

So I did a little more digging and found that ppl use DC2 Exhausts with minor mods. but none have posted what needed to be modded. I pm'd a few.