Ek4 siR


SiR Costello

B16 nitrous
Joined
May 7, 2017
Messages
17
Car(s)
Ek4 siR
Alri lads from Dublin new to the forum il introduce meself with a few pics of my ek4 siR. Iv owned the car for four years now it's come on a long way since I first got it but still not finished lol.
IMG_0420.PNG
IMG_0421.PNG IMG_0423.PNG IMG_0423.PNG
IMG_0424.PNG
 
That is a cracker , lovely sir pal , very clean and welcome to ek9.org .
Again very nice sir
 
Nice one pal still more to do with it but it's gettin ther I'm shur d forum will b a good help on d way thanks bud
 
Have you heard of hondash? It plugs into you scan 3 pin port and read all the cars sensor and you can have it on your phone or tab , very good little device , it's only 39 euro and then you download the app from play store.
Well worth getting imo , also reads codes and deletes them if necessary.

 
Fuel trim bottom left and o2 sensor on the right of that .
Fuel pressure and map sensor reading, and TPS.
IACV, VERY HANDY,

 
Have you heard of hondash? It plugs into you scan 3 pin port and read all the cars sensor and you can have it on your phone or tab , very good little device , it's only 39 euro and then you download the app from play store.
Well worth getting imo , also reads codes and deletes them if necessary.

Looks like it would come in handy pal does it nock of any lights on d dash need to get the airbag light of my yoke
 
Looks like it would come in handy pal does it nock of any lights on d dash need to get the airbag light of my yoke

If your stuck and not bothered about airbags you can just wire a timer in that's what I do
 
Looks like it would come in handy pal does it nock of any lights on d dash need to get the airbag light of my yoke
Yes bud it knock out cel, but if you haven't fixed the problem it will just come back .
Now what I did for my airbag light was ,
I wired in a little resistor between the airbag wires ,
And I still have some if your close to Dublin,
Airbag light works as normal after that .
Very simple to do ,and your passo airbag also works as normal

https://honda-tech.com/forums/honda-accord-1990-2002-2/how-bypass-srs-aftermarket-wheel-2398113/
 
Last edited:
If your stuck and not bothered about airbags you can just wire a timer in that's what I do
Iv done that for few years now , but last year the nct wanted a modification report for the aftermarket steering wheel from my insurance company, which was a pain ,
I ended up putting the old wheel back on for the test ,
But I will chance it again this time with aftermarket on ,
 
Yes bud it knock out cel, but if you haven't fixed the problem it will just come back .
Now what I did for my airbag light was ,
I wired in a little resistor between the airbag wires ,
And I still have some if your close to Dublin,
Airbag light works as normal after that .
Very simple to do ,and your passo airbag also works as normal
The airbag light has been on since I bought the car nearly 5 years ago wasn't really bothering me as it doesn't slow it down but I put a aftermarket one in it recently so I'm gona havta get it sorted for the nct. I'm not far from blanch bud if ya live around dat way tanks pal
 
Yeah I'm in clondalkin so if your about I can give you the resistor, that will work with both steering wheels ,
If your srs light was on with the standard steering wheel I'd say your clock wheel is snapped,
Does your horn work ?
Anyway I will Pm you my number, just bell me when close to liffeyvalley or clondalkin village,
It's a simple job to do .
https://honda-tech.com/forums/honda-accord-1990-2002-2/how-bypass-srs-aftermarket-wheel-2398113/
Ye ur on it der pal the light was on with the standard wheel and the horn never worked is this the cause of the horn not working aswel fair play to ya bud il b over dat direction tomorrow if your around havta pick up a few bits in Icetronix anyway
 
Ye ur on it der pal the light was on with the standard wheel and the horn never worked is this the cause of the horn not working aswel fair play to ya bud il b over dat direction tomorrow if your around havta pick up a few bits in Icetronix anyway
Good stuff ,I'm not far from icetronix, your clock spring snapped when someone put it back on and never centred it right , not a big deal , I will send you on my number in Pm
 
Good stuff ,I'm not far from icetronix, your clock spring snapped when someone put it back on and never centred it right , not a big deal , I will send you on my number in Pm
Nice one pal at least that's that problem sorted for the test sound man
 
IMG_0434.PNG
IMG_0435.PNG
Screenshot_2017-01-01-11-02-19.png

A few more pics of the whip lads let us no what ya think al comments n ideas takin on bord
 
Back
Top