FUJITSUBO RM-01A Exhaust for civic ek4/9


si8pny

Well-Known Member
Joined
Sep 21, 2010
Messages
1,449
FUJITSUBO RM-01A Exhaust for civic ek4/9
been modified to fit a k swap In good condition slight scrape to the mid box and the rear tip has the smallest of dents not noticeable once fitted.

New these are £800 -£1,000 that's if you can even find them for the ek civic.

Due to the scrapes and the front part of the b pipe being modified for a k swap £450 ono collected.
Will not post due to size and risk of getting damaged.

Located South Wales Newport NP20

Some blurb below about it. Pipe size 60.5mm Tail size 89mm The Fujitsubo RM-01A exhaust was originally developed for race cars. It's a lightweight muffler with a highly efficient exhaust flow. The design and use of light weight raw materials makes the Fujitsubo RM-01A exhaust much lighter than OEM exhaust systems. The Fujitsubo RM-01A exhaust also features lightweight bracket and flange. This lightweight construction greatly enhances efficiency while maintaining its sporty intensity. The hangers of the Fujitsubo RM-01A exhaust also include a base plate which maximizes durability for the exhaust system. The Fujitsubo RM-01A exhaust pipe and canister is manufactured with strong 1.0mm / 1.2mm SUS304 stainless steel. By optimizing the thickness of the exhaust piping and canister, the Fujitsubo maximizes the RM-01A exhaust race inspired feel. This combination of light weight design and strength provide both efficiency and durability.


168861869_10157611021431296_8096539356422286093_n.jpg

168521107_10157611021456296_7589547578291085544_n.jpg

168110044_10157611021531296_6016409235566577963_n.jpg

168690407_10157611021636296_5966720921058030190_n.jpg
168234736_10157611021596296_7382888399952814332_n.jpg
 
in what way was it modified for K? shortened? and any pictures showing it?

might be interested for a B build
 
Last edited:
in what way was it modified for K? shortened? and any pictures showing it?

might be interested for a B build
The B pipe pictures show it but for the K it was shortened slightly due to how the manifolds sit. Wouldnt be hard to make it fit a B again
 
The B pipe pictures show it but for the K it was shortened slightly due to how the manifolds sit. Wouldnt be hard to make it fit a B again
got any better pictures of it? cant see how its been modded in those pics
 
Still here someone make a sensible offer before I have to deal with Ebay
 
Back
Top