How to remove pins from door jamb harness

[_JT]

One of the wires on my door jamb harness has broken I need to remove the pin but I can't get it out. Google hasn't provided me with an adequate answer. I've tried poking around in the connector that's full of grease but nothing happened...Anyone please?

 

[elchunk]

not sure what plug your trying to depin but that link shows the general idea on how to depin a plug. easy once you've done it a few times.

How to: Depin 2 wire CKF to 3 wire - Honda-Tech

another one.

and another

http://www.acuraworld.com/tsb/TSX/b00-039.pdf


HTH

 

[_JT]

Talking about the connector that comes out of the car and connects to the door:

I have taken of the thingie that keeps the hose on it's place and I've pulled out that white thing as far as I can but still can't push it out. Such poor design by Honda

 

[elchunk]

you'll not be able to just push it out, there will be a tab securing it in place. You will have to either lift it up from the front or push it up from the rear of the connector before the pin can be released.

 

[_JT]

Yeah I have tried that but no luck so far I'll give it another go, thanks.

 

[_JT]

Did not succeed and in the process of putting back my door, which I had to do by myself for the most part damaged some paint and could not get the bolts of the lower hinge in.... FUUUUUUUUUUUUUUUUUUU