Jap EG9 braking


jamie-gings

Member
Joined
Mar 13, 2010
Messages
448
iv decided to brake my EG9 sir , im pretty much just selling the running gear and main bits and gonna keep the shell and build it back up eventually

car was imported from japan in sept 08 and has only done 30k km since then, all parts on the car are in very good condition

Only whats listed is for sale
Price reflects condition,all parts are 100%

Original b16a Sir engine with 168k km came into the country in 08 with 138k km, timing belt, water pump, tensioner and oil pump were all changed at 140k km.
the engine doesnt burn a drop of oil and not a puff of smoke, theres ITR cams springs and retainers in it, ngk plugs and leads (only 3k old), dizzy has new coil, new cap and new rotor arm, oem intake mani with ITR throttle body(port matched), new map sensor, new tps sensor, number of gaskets have ben changed recently ie inlet mani, exhaust mani, throttle body, new rocker cover gasket etc. comes with all auxileries
600euro

DSC00612.jpg

DSC00415.jpg



Toda flywheel (very hard got )and f1 stage 3 clutch (clutch has only done 5k km)
both are mint , the clutch is one of the old f1's and is not like the usual shite now, serious bite out of it
300
DSC00159.jpg



Rebuilt open lsd Y21 box with straight cut gear x 4.9fd
this box stands me about 1400euro, the final drive has about 1k km on it, the straight cut make a savage sound when driving, all bearings have ben changed with genuine honda bearings i9ncluding input shaft bearing, the 3rd gear synchro hub and sleeve were changed , and all other synchros , hubs etc were all inspected and are perfect. box has 0km's on it since rebuild

550 euro





drives , both are mint, have fitted new inner cv joint bearings and regreased that along with the drivers side drive cup
120 for both
DSC00276.jpg


ecu
50
DSC00693.jpg



engine loom
50

ull set of tigersealed mounts including torque mounts
100e


jasma stamped tanabe 4-2-1 mani + decat, not a mark on it
top half is heatwrapped
180e
DSC00926.jpg

DSC00928.jpg

DSC00930.jpg



Tanabe catback exhaust

v v good condition
(still on the car so dont have much pics)

lovely sound and good gains
250e





tein coilovers
been in the car since japan
no knocks or leaks
200e
DSC00253.jpg


Genuine mugen rnr alloys with genuine centre caps
tyres are good

absolutely no kerbin, or buckles
450e
DSC00066.jpg

2-2.jpg

DSC00263.jpg




Hub Conversion

good pads all round, good discs, 2 new front brake lines, hadnbrake cables

250
(will do deal on hubs and coilovers)
 
Last edited:
replied guys

oh ya sorry its 2.25 afaik, its b16a specific so is too short for b16b and b18
also top half is heat wrapped now btw, not a mark on the bottom either like most
 
A question is your enclosure for your air filter home made. I've been thinking about doing something like this myself.
 
im not too sure, its possibly 2.5 but more than likely 2.25 if thats what most jasma ones are ?
anyone for a mint jasma manifold, not a mark on it, great gains from this on a b16a
 
Pm me back about what you want to do with alloys mate

still waiting for a price delivered

Aroon
 
hello have you got the dash loom the one be hide the heater box for the eg9 and were are you from in ireland thanks
 
Jesus why is this so hard to find i have been looking for months thanks any way
 
Back
Top