K20a and box. K swap parts


Ash-typer

Member
Joined
Apr 21, 2012
Messages
455
Reputation:
PayPal: Yes
Price: Below
Location: Telford
Condition: Brand new/ new
Descrition...

A change of heart has led me to break and abort this project as im getting old and I want to invest my money else where.



Breaking k20a civic ek9 type R including engine/gearbox all parts:

K20a jdm DC5 engine huge spec 270 bhp (tdi north Dyno) (READ BELOW)

DC5 gearbox with spoon 5.1 final drive



K TUNED race spec shifter/with knob £500
K TUNED VELCOCITY stack intake £180
K TUNED radiator/hasport adapter k tuned fan switch and coolant temp. £350
HASPORT ekk2 88a mounts £350
DC2 subframe polybushed including rack £300
Hybrid racing PLM 4-1 header true 3 inch flange bore with new flexi £300
Ek 96-00 wiring harness conversion £200
Hybrid racing shifter cables £200

RBC/hybrid racing inlet manifold very rare item discontinued custom ported by hybrid racing them selfs as close to individual throttle bodies as you will get. 70mm inlet has been ported along with hybrid racing 74mm very rare throttle body. It comes with hybrid racing fuel rail and RDX 410 c injectors. £600

K20a engine.
Engine has undergone some serious head work to take 9000 rpm+.
Prayoonto stage 2 cams
Brian crower titanium retainers
Brian crower dual valve springs
Supertech valves
Toda head gasket
Super tech Magbronze valve guides
ARP head studs
New lma springs
New valve stem seals

The cams are made by Norris Prayoonto a very famous American drag racing company and cost over £700, this isn't your average drop in cams it has been built to a very high standard fully built head. If you were to build this head it would cost you in exess of £1700.
I am also including a brilliant 4 paddle stage 2 exedy clutch and ACT 3.8 kg lightened flywheel with the engine. Comes with loom. I want £1600 for this

Thanks for reading
 
Pictures
 

Attachments

  • IMG_5988.jpg
    IMG_5988.jpg
    157.5 KB · Views: 318
  • IMG_6695.JPG
    IMG_6695.JPG
    140.8 KB · Views: 293
  • IMG_6696.JPG
    IMG_6696.JPG
    108 KB · Views: 318
  • IMG_6791.JPG
    IMG_6791.JPG
    1.1 MB · Views: 336
  • IMG_6821.JPG
    IMG_6821.JPG
    785.4 KB · Views: 320
  • IMG_7330.JPG
    IMG_7330.JPG
    1.1 MB · Views: 314
  • IMG_7985.JPG
    IMG_7985.JPG
    1.2 MB · Views: 311
  • IMG_7986.JPG
    IMG_7986.JPG
    1.2 MB · Views: 309
  • IMG_8282.JPG
    IMG_8282.JPG
    1.5 MB · Views: 310
  • IMG_8601.JPG
    IMG_8601.JPG
    974.7 KB · Views: 320
  • IMG_8812.jpg
    IMG_8812.jpg
    206.1 KB · Views: 312
  • IMG_8813.jpg
    IMG_8813.jpg
    141.3 KB · Views: 312
  • IMG_9146.JPG
    IMG_9146.JPG
    1.6 MB · Views: 322
My b18 should be sold Thursday and you're not that far, may have to enquire about that engine just for the head should be fun with a K24 bottom end attached.
 
Literally up the road from me.... I have my current bseries setup and an is300 sportcross that I would be willing to liquidate for this.....
 
Everything is SOLD. I am keeping the engine

Only gearbox is available see other thread ~~<<<
 
Back
Top