Mitsubishi Evo seats in EK4


Dan_EK4

Member
Joined
Nov 4, 2012
Messages
102
Been after some Recaros for a while but DC2, EK9 and ATR seats go for crazy money but I noticed the Evo 2, 3, 4 and 5 have the same thrones as the DC2 teg and EK9 just with different fabric and are at least £200 cheaper. Anyone installed these into an EK4 or would I have to change the subframes?
 
No just get ek9 rails job done. Or dc2 ones but one bolt wont fit, but there abit lower then ek rails.
 
my mate has evo6 recaros fited into his ek, although think some modification were needed to the rails
 
I know the feeling..... I'm waiting for the rex to blow so I can rob the recaros out of that :dance:
 
Dc2 rails are better and cheaper. Easy to mod so that everything lines up too.
 
Most of the early recaro's have 6 bolt holes under the seats (3 on each side)
One at the rear, and two close ones at the front of the seat.

So you can choose between recaro SR3 (Supra, Celica, Evo's) design or go old school and get some recaro classic design (Mk2 Golfs, Fords).

EK9 or DC2 rails will do (DC2 rails sit a little lower, and take 5 mins to mod so all 4 bolts secure the seat to the floor) can send pics if you require
 
Back
Top