MY 1992 JDM 4DR EG9 SiR Ferio (K24 update)


Or make a custom bracket to make it fit? I done it on my ek. Works well and is low key.

I dont think am gonna bother, its sits perfect an bolted in securely, looking in to getting something else
 
Kswap ready to go in :cool:

image_zpsnwcmrfhs.jpeg



Engine spec:

Hondata Kpro tuned at TDI North @262hp 178lb/ft
Crossover @4,700, redline rpm @8,700

K20a2 complete engine & box
Custom braided engine loom wiretucked
TDI North Stage 1 cams
RDX410cc injectors
Hondata Kpro
Hybrid bolt in shifter box
HaSport engine mounts
HaSport driveshafts
Hybrid Racing shifter box mounting plate
Hybrid Racing throttle cable
Hybrid Racing shifter cables
Hybrid Racing clutch line
Hybrid Racing conversion harness
Hybrid Racing race manifold
AEM fuel rail
Fuel Lab fuel filter
Fuel Lab FPR
Pirtek custom fuel lines
Walboro 255 fuel pump
3" custom intake
Mishimoto Gold heat reflective tape
S2000 air filter
S90 70mm T/B
T/B Adapter plate machined to 70mm
Crinkle red RBC inlet shaved port matched to 70mm T/B
F1 racing lightweight flywheel
Stage 3 clutch
3" custom exhaust w/bung
Black silicone rad hoses
Toyosports ally rad with ally fan shroud
S9B LSD machine to fit kseries box new diff bearings and MTF-3 gearbox oil (July 29th)
 
Good luck with the swap! I see that Eg you took it out of, I'm sure that's gonna be a lot of fun:)
 
Back
Top