Oil return


Omen666

Active Member
Joined
Mar 16, 2016
Messages
211
image.png
If possible can some one please post up a pic of there oil return to the sump as I bought parts off eBay and bloody seller didn't provide fitting instructions, this is what I was sent but I wanna see it on a sump so I know what papers go where thanks in advance
 
You'll need to drill a hole in the sump and bolt that in by the looks of it?
I'd recommend getting the setup bolted on with the downpipe and everything else in place, then you can find the ideal place to put your return.
 
Iirc you was after a socketted p28 ecu wasn't you?
I believe @B16Swt may have something for sale soon.
 
You'll need to drill a hole in the sump and bolt that in by the looks of it?
I'd recommend getting the setup bolted on with the downpipe and everything else in place, then you can find the ideal place to put your return.
Can't do the mock up with the down pipe pal as I'm in too minds either to have the exhaust coming out the bonnet or through the side of the front drivers side bumper
 
If you do need one still I do have one for sale. :nice:
 
Braided hose is crap!! Use silicone hose as big as possible. I used 20mm ID 90* hose I'll post a picture of mine later.
 
Well got my hole drilled finally after the bloody drill charge died and couldn't find the charger 2 weeks later new charge arrived, so my nxt question is this, the part that bolts to the sump from the inside doesn't come with any type of seal so do I need to go and get an O RING or use a gasket sealant to stop the oil from leaking out?
 
Usually the sump fittings are welded on, you using a standard sump pan?
 
Yes pal just using standard oil pal fittings didn't come with any instructions
 
That'll be a fitting that's got to be welded in then.
 
Back
Top