P30 ECU + keys + Blackbox (Steering column shroud)


BlueGhost

Member
Joined
Sep 15, 2014
Messages
48
Need this for my B18C engine swap. Not having any luck whatsoever with the JDM P73 :(
 
I have the JDM P73 which isn't immobilised.

I am having problems with the idle. Everything has been changed or inspected to make sure there are no air leaks. The car sits on 1100 rpm but that's a little too high, impossible to get it any lower.
I've narrowed it down to the 'ELD' which the JDM motors didn't have but the uk spec motors did. I'm hoping that by using a P30 ECU which has the 'eld' component it might solve my issues?

Any help would be much appreciated. Have had this problem for months now...it's becoming a but depressing lol
 
I have the same issue

I wired in a voltage regulator to the eld pin and it dropped idle but now flashes the knock code with that connected for some reason I need to do a bit of messing about to get it right! I'll let you know as soon as I do!

And the P30 won't run the engine properly as its for a b16
 
I have the same issue

I wired in a voltage regulator to the eld pin and it dropped idle but now flashes the knock code with that connected for some reason I need to do a bit of messing about to get it right! I'll let you know as soon as I do!

And the P30 won't run the engine properly as its for a b16

Ah finally someone who has the same problem as me! I hope you get it sorted, please keep me updated

EDIT: If the knock sensor isn't connected, would it still throw an error code?
 
Yeah it faults with no knock sensor connected will run like a burst ball too! Have you wired in the knock sensor? @BlueGhost
 
Back
Top