Parts for sale.


civikk

Member
Joined
Dec 26, 2010
Messages
302
Ok guys i will just list the parts as i go and if i miss anything out i will come back to it. Prices do not include delivery, i am also located in Edinburgh Scotland.
Paypal and pick up welcome.
To contact me send me a pm if you would like to speak to me about the parts then i will send you my number.

Engine.

Starting of with the engine, it is a B16A2 and has done roughly 80k miles. Condition wise it's a very good engine doesn't smoke and runs well as it should. Only problem it has is one of the bushings on the drive shaft has split and will be replaced soon. Please note this is just the engine i will add everything needed for this including a radiator ecu ect. ( I have a video of it running before i took it out of the car if buyer wishes to see)
£400. SOLD

Next up the gearbox. It is a LSD S80 of which year im not sure as it is still attached to the engine at this moment in time as seen on photo's. Condition of this is spot on no crunch's through the gears i also have a video of this running as proof. Would like £400. SOLD.

AEM V2. Nothing really to say about this apart from it's condition, has a few scratch's on it and was on my car for 7 months. Does sound great and a really good induction kit fit's a B16a2. £150 SOLD

DC Manifold 4-2-1, 2.25. I bought this the same time as my AEM so its not even a year old. No cracks or anything like that could do with a polish which i will do before sale. £170 SOLD

Exhaust. Was made for me awhile back it is stainless steel 2.5 diameter and was made for my 6th gen coupe. This comes with back box and de-cat which i only got the de-cat in June costing £70. i would like £110 for the lot.

Suspension/wheels and brakes.

Koni adjustable's. These are one of my mods i would regard as a best buy, truly amazing handling from these and a great set up. I have owned these for 2 years and they were never exposed to the winter elements. They drop the car 40mm at the front and 35mm at the back these will also fit any 6th gen civic. Condition wise they could do with a clean but i was surprised when i took these off to see how well they looked, springs all look good apart from a few chips of paint missing. (please note these are not collies) £200 SOLD

Password JDM 3 point strut brace. This will fit any 6th gen civic great looking strut brace comes in black. £130 SOLD

Password JDM 4 point strut brace. Great looking and pretty rare probably to do with the price as it's really strong and does its job. Fits 96-00 civic coupe may fit 5th gens as well. £150

Tegiwa tie bar comes in candy red never actually fitted this to my car. £40.

Fox alloys. Great wee set of winter wheels as its coming up for that time. Size is 195/60/14. All tyres are almost brand new with loads of tread apart from one which has a bulge in the side tyre wall. £60

Brake set. In this i have EBC drilled and grooved discs standard calipers and green stuff pads. Disc size is 262 and were only on the car a year along with the green stuff. Pictures to show wear. This would be a good upgrade for EJ9 drivers £80 for the lot.

Interior.

Red EK9 Recaro's. I bought these of a friend/member of this forum. Great seats and i have loved every minute of owning them. Condition wise passenger seat is perfect drivers seat has bolster wear and some light scratch's which i have takin pictures of there are no fag burns or anything like that these have been well looked after. £350 SOLD

DC2 seat rails. starting of with i don't have pictures of this part as i put them in a box and taped them up so i do apologise. Theses rails fit into EK shapes apart from one of the bolts at the back does not line up, i never really found any problems with this as it still felt secure. £120

EK9 steering wheel Also bought of the same friend. Great looking and has a great feel to it. Its condition, all stitching is good. There is a small dent which i think you can see in the photo's by the horn button on the left, was like this when i bought it. £175

Type R gear knob. This has a good feel to it with the right weight and is nice and subtle. £15

Kenwood CD player. Nothing amazing about this but can plug in mp3's to it. £20 Also have the original Honda CD player but my battery died one day and when i started it back up i needed the code for it so if interested in this let me know. SOLD

Dead foot pedal. would like £5 for this. SOLD

Exterior.

OEM Wind Defelctors. Bought from Chatham's Honda in Edinburgh only had them on the car 2 weeks so still look brand new. Bad points i lost 2 of the bolts but they still held down really well with out them. £50 SOLD

DOHC stickers. Never got a chance to put these on my car they come in white and were also bought from Chatham's Honda. £10 SOLD

Reputation Centre. http://www.ek9.org/forum/reputation-center/42673-civikk.html
 

Attachments

  • $Picture 184.jpg
    $Picture 184.jpg
    378.9 KB · Views: 423
  • $Picture 182.jpg
    $Picture 182.jpg
    367.4 KB · Views: 395
  • $Picture 186.jpg
    $Picture 186.jpg
    384.3 KB · Views: 354
  • $Picture 150.jpg
    $Picture 150.jpg
    358.2 KB · Views: 375
  • $Picture 147.jpg
    $Picture 147.jpg
    378.9 KB · Views: 356
  • $DSC00814.jpg
    $DSC00814.jpg
    405.5 KB · Views: 350
  • $DSC00817.jpg
    $DSC00817.jpg
    411.1 KB · Views: 426
  • $Picture 169.jpg
    $Picture 169.jpg
    393.7 KB · Views: 372
  • $Picture 166.jpg
    $Picture 166.jpg
    346.3 KB · Views: 347
  • $Picture 170.jpg
    $Picture 170.jpg
    343.5 KB · Views: 414
  • $Picture 055.jpg
    $Picture 055.jpg
    133.4 KB · Views: 389
  • $Picture 057.jpg
    $Picture 057.jpg
    119.6 KB · Views: 368
  • $Picture 156.jpg
    $Picture 156.jpg
    389.2 KB · Views: 370
  • $Picture 155.jpg
    $Picture 155.jpg
    375.1 KB · Views: 350
  • $Picture 154.jpg
    $Picture 154.jpg
    389.8 KB · Views: 373
  • $Picture 058.jpg
    $Picture 058.jpg
    129.8 KB · Views: 364
  • $Picture 070.jpg
    $Picture 070.jpg
    112.2 KB · Views: 377
  • $Picture 116.jpg
    $Picture 116.jpg
    326.3 KB · Views: 318
  • $DSC00813.jpg
    $DSC00813.jpg
    373.7 KB · Views: 355
  • $DSC00812.jpg
    $DSC00812.jpg
    371.2 KB · Views: 344
Last edited:
Not sure if its right to comment or not, but i dont think your suspension will lower the car 40 inches at the front and 35 inches at the back, may lead to problems if it did.....
 
More pics to come.
 

Attachments

  • $Picture 159.jpg
    $Picture 159.jpg
    383 KB · Views: 280
  • $Picture 162.jpg
    $Picture 162.jpg
    354.1 KB · Views: 271
  • $Picture 163.jpg
    $Picture 163.jpg
    350.1 KB · Views: 281
  • $Picture 158.jpg
    $Picture 158.jpg
    393 KB · Views: 310
  • $DSC00812.jpg
    $DSC00812.jpg
    371.2 KB · Views: 273
  • $Picture 137.jpg
    $Picture 137.jpg
    350.5 KB · Views: 313
  • $Picture 136.jpg
    $Picture 136.jpg
    354.8 KB · Views: 285
  • $Picture 138.jpg
    $Picture 138.jpg
    354.8 KB · Views: 303
  • $Picture 134.jpg
    $Picture 134.jpg
    353.1 KB · Views: 293
  • $Picture 145.jpg
    $Picture 145.jpg
    367.3 KB · Views: 300
  • $Picture 175.jpg
    $Picture 175.jpg
    339.1 KB · Views: 273
  • $Picture 173.jpg
    $Picture 173.jpg
    335.1 KB · Views: 284
  • $Picture 157.jpg
    $Picture 157.jpg
    376.3 KB · Views: 274
  • $Picture 144.jpg
    $Picture 144.jpg
    368.9 KB · Views: 321
  • $Picture 141.jpg
    $Picture 141.jpg
    343.6 KB · Views: 290
  • $Picture 193.jpg
    $Picture 193.jpg
    97.2 KB · Views: 319
  • $Picture 195.jpg
    $Picture 195.jpg
    138.9 KB · Views: 345
  • $Picture 196.jpg
    $Picture 196.jpg
    107 KB · Views: 284
  • $Picture 197.jpg
    $Picture 197.jpg
    118.4 KB · Views: 286
  • $Picture 192.jpg
    $Picture 192.jpg
    138.7 KB · Views: 333
Not sure if its right to comment or not, but i dont think your suspension will lower the car 40 inches at the front and 35 inches at the back, may lead to problems if it did.....

lol you are right it has been a long day.
 
payment sent have added a note to payment with delivery address. cheers
 
What year is the b16a2 from, does it have an engine loom, ecu and shafts? if so is it obd2a or obd2b.

Thanks, Dan
 
Lyall will take the deadmans pedal dude, drop him a pm.
 
What year is the b16a2 from, does it have an engine loom, ecu and shafts? if so is it obd2a or obd2b.

Thanks, Dan

Hi Dan the year of the engine is 98, it does come with ECU engine loom and drive shafts although i did not mention one of the shafts rubber bush's has split and will be replaced, i have edited my original post. Im not 100% sure but i think it is obd2a but i will have to check for you.

Ross.
 
Back
Top