Problems with knock sensor

[Civic/98]

Hi,
I speak sometimes from Spain (Canary Island).
I have a problem with knock sensor.
My civic has: B16A2, OBDIIA (P2T).
My hondata(S300) is a limited edition without harness.
When I enable knock sensor, hondata light fault. I look for fault codes and say "ks" sensor knock.
If this sensor is disable, no problem.
With stock ECU, no problem.

I think that S300 has not pin connected on board, into ECU.
The cable of knock is red/blue in my car and his position:
http://www.phearable.net/tech/wiring/wiring.96-98_2.jpg

can some body help me?
Thanks you...
greetings

PD: I have tried contact with ek9turbo (seller of my S300), but he is not answer since a long time. I hope that he is ok, of holidays or working.
Do you Know of him?

 

[olly ek9]

hondata S300 wont run the knocksensor on it`s own you need some additional hardware that i don`t think is readily available, ek9turbo is definitley your man,,

 

[JIMBOB-EK9]

PD: I have tried contact with ek9turbo (seller of my S300), but he is not answer since a long time. I hope that he is ok, of holidays or working.
Do you Know of him?

I will give Will (EK9turbo) a ring now & tell him your asking for him!
He will be able to help you out!
Im not so clued up on the S300 so i will leave for Will to advise!

Pritty sure my S300 is running a knock sensor & as you all know Will did all the tuning on my car so he defo your man!

 

[EK9turbo]

Hi Christian, I have not seen any emails from you... i will check the email-filters. had a problem with them before and missed a lot of emails.

S300 limited version with show cover doesnt have internal knock sensor circuitry. only certain P72 or P30 ecus have the knock circuitry on obd1.

hondata S300 wont run the knocksensor on it`s own you need some additional hardware that i don`t think is readily available, ek9turbo is definitley your man,,

Im the only person who makes and sells the said circuitry

I will give Will (EK9turbo) a ring now & tell him your asking for him!
He will be able to help you out!
Im not so clued up on the S300 so i will leave for Will to advise!

Pritty sure my S300 is running a knock sensor & as you all know Will did all the tuning on my car so he defo your man!

Thanks JB

 

[Civic/98]

I will give Will (EK9turbo) a ring now & tell him your asking for him!
He will be able to help you out!
Im not so clued up on the S300 so i will leave for Will to advise!

Pritty sure my S300 is running a knock sensor & as you all know Will did all the tuning on my car so he defo your man!

Hi guys,
JIMBOB-EK9 thanks you very much to contact with Will. Very very nice.
Hey Will, I am happy that you are ok. I will tried with others e-mails and if you are not reading its then I will ring althought I tell you, my english is horrible.hehehe
you have reason, this ECU is coverted.


Thanks...greetings