RoCo crx time attack car

[webartie]

thanks for all the comments!!!

update. today we cleaned and painted the rear arms. pressed out the old bushes and pressed in the rs rosejointed ones. the whole back arms are now rosejointed. painted the rear calipers and put in the caobone loraine rc6 series pads. the brake lines are bf goodridge. rear end done
all the handbrake lines and fittings were removed.

 

[ARzEK4]

Fresh man ! Keep em commin ima fan lol

 

[webartie]

Fresh man ! Keep em commin ima fan lol

cheers

 

[Vtec6000]

Not a bad days work keith Are those K sport coilovers I see?

 

[NeilVtec]

impressive! nice update

 

[webartie]

Not a bad days work keith Are those K sport coilovers I see?

yep.... with 12kg front and 10kg rear springs. really like them
hope its no too ridged but we'll see

 

[zeshtoo22]

N I C E W O R K..

would like to see more updates of it.

 

[webartie]

hey update again...
just finished my favourite mod to this whole build... the gear box.
the below is the pics of strip and build.

the spec....
2000 ctr sc4 gear box
ats and accross plated 1.5 way lsd
ats and accross speedometer gear and connection
close ratio, shot peened 3rd, 4th and 5th gears

the box with new parts

split box

old helical lsd

main shaft split, old gears out

main shaft and new gears

new gears all assembled and clearences checked.... all good!!

new lsd

standard speedo above and ats below..

all reassembled

 

[Vtec6000]

Nice Your old gears soon to be my new gears

 

[webartie]

Nice Your old gears soon to be my new gears

in transit as we speak!!! he will call you tomrow!!!!!

one mans waste is another mans treasure!!!

 

[Vtec6000]

in transit as we speak!!! he will call you tomrow!!!!!

one mans waste is another mans treasure!!!

 

[webartie]

Update... done a few nights just had no time to put up pics.

cleaned down and fitted front sub frame and manual rack. i unfortunatly have to run the old upper and lower front rams for the min as the rose jointed ones have not landed yet. using the eg k sports with 12 kg front springs and 10 kg rear springs. then we cleaned down the front hubs and fitted the rs roll center adjusters. new brembo discs and goodridge braided lines and carbon louraine pads. the roll bar is stock dual carb one... have my reasons ha ha. then fitted the wheel spacers ( 1 " ones) the pedal boxs were cleaned down and tonite i fitted the clutch section and the brake booster. more updates soon!!!!

subframe painted

manual rack being cleaned up

roll bar painted

subframe done

front arms ready

rack fitted

old hydro rack

front hubs painted

subframe fitted

roll center adjusters fitted

k sports in

discs on

front calipers on

brake and clutch main fittings on

clutch pedal in for the last time!

 

[ek9 karnage]

everythings looking fresh
keep it coming

 

[tedman]

Gonna be a weapon! Keep up the good work man...

 

[webartie]

thanks lads!!!

update

fitted steering colum and finished pedal box, also fitted the razo pedals to the pedal box. sparco deep dish steering wheel and boss.
Fitted new outer track rod ends too.

Looks far back, but seat is well back hope its ok ha ha

Mounted clutch resvoir and wiper motor

rear engine mount fitted

old wheels on, the new wheels had no tyres so its old for a min,

bye bye old rotessiery

it moves!!!

new handbrake and mounted the brake bias valve to the handbrake.

ill plumb the brakes over the next day or few...

 

[Vtec6000]

Will be some machine when finished

 

[webartie]

Will be some machine when finished

cheers..... hope so
will also look better when professionally painted on outside and my new wheels!!!

 

[webartie]

few things done:

integra type r fuel tank fitted:
it actually fits pretty well, can use oem straps....

running the hard copper brake lines (thanks Darren!!!)

the hydro handbrake fitted.

the window wiper linkages painted and refitted

 

[monggy]

great build!

 

[Shift]

Update!!!!