s2000 clutch master cylinder in my ek9


E

E KAY 9

New Member
Joined
Jan 12, 2009
Messages
119
Just wondering if any1 has done this before..i have 1 in my ek with an exedy twin disc clutch..after driving the car for about 5-6 miles the clutch tends to stick on me..i can put the car in first gear release the clutch and the car does not shut off or goes anywhere.it just rev's...any help?
 
Sorry, but why do you have a twin disc? Does the twin disc require the use of an S2000 master cylinder? Sounds like clutch is slipping, how old is it?
 
it does not require a s2000 master cylinder..it just for looks..the reservoir is on top of the cylinder instead of on the side..iam using a twin disc because my car is fully built with 650whp and iam looking for more
 
I put one in my ej6. You just have to take the nut off the cylinder on the inside of the car and run the bracket that holds the pin all the way back till it stopped.
 
E KAY 9 said:
it does not require a s2000 master cylinder..it just for looks..the reservoir is on top of the cylinder instead of on the side..iam using a twin disc because my car is fully built with 650whp and iam looking for more
Click to expand...

I wouldn't know because the last time i asked you about the specs of your car which was 6 months ago you wouldn't say, you said you would post soon and you never did... ...And yeah no bumping project threads plz, kinda pointless...
 
blinx9900 said:
I wouldn't know because the last time i asked you about the specs of your car which was 6 months ago you wouldn't say, you said you would post soon and you never did... ...And yeah no bumping project threads plz, kinda pointless...
Click to expand...

iam still waiting to get my car tuned..its been sitting in my garage...pics and video of the tune will be up as soon as its done..maybe 3 weeks or soo..
i found a fab shop who makes the spacer for the s2000 CMC..hopefully this works

only pics i have for now..but updates will be up after my tune
120nymt.jpg

10d6yaw.jpg
 
ok guys..a lil bit of an update..i put in the spacer i got from allinfab.com and the clutch seems to be much better..its not getting suck..so hopefully i can be tuned on friday and pics will be up of the clutch master cylinder :)
 
Why didn't you shorten the rod on the s2k clutch cyl. about half an inch.? Seems to work pefect like that. Im planning on doing the same.

Sick setup btw...
 
R-civic said:
Why didn't you shorten the rod on the s2k clutch cyl. about half an inch.? Seems to work pefect like that. Im planning on doing the same.

Sick setup btw...
Click to expand...

Well I ended up using the spacer,but I don't think it works soo good with my twin disc. So iam going back to stock. I rather have my performance than looks. Lol
 
You must log in or register to reply here.
Back
Top