Update on H-swap EK


Hey guys,

Not much to report today, sent my door panel cards to the other side of the island to get fixed and fiberglass and then smoothen down and to get threadlock cause want to put back on the brackets this evening.
20211104_071039.jpg

Both are out and getting fix cause they tend to break by just even making heavy eye contact so wont get them til end of the month.

Top left is what i ordered, bottom left is what i sprayed but it got fuzzy. On the right is what i picked up today at a local sewing/fabric store that have all kinds of colours and i was like "well Duh! Should have came here before ordering":slap:
20211104_163255.jpg


So those will be going on the door panel cards once it's complete, gotta keep with the theme ;)

Here we are, alternator and A/C compressor will be placed in once the engine is in.
IMG-20211104-WA0023.jpeg

Looks nice eh? I like it too.:dance:

See ya guys on the next follow up
 
Hey guys, looky what came in today
IMG-20211105-WA0024.jpeg


And got me a 24" industrial fan to be able to work at nights (not be bothered by mosquitoes)
IMG-20211105-WA0034.jpeg
 
Hey guys,

Been away since i injured myself, grinder rubbed my finger and got work done but the injury stopped me from working on the car for a entire week

Before
20211108_120625.jpg

Semi after (still have more work to do but cant hold the grinder nor gloves on properly)
20211112_161113.jpg

Trust me it hurt and realized I should have wear thicker gloves *sigh *
IMG-20211110-WA0056.jpeg


So before that little booboo, here is what i been cleaning up
20211108_122856.jpg

20211108_193221.jpg


20211108_193033.jpg

20211110_103326.jpg


20211110_103338.jpg

20211110_103332.jpg

Need to change those out^

Brace yourself:naughty:
1st coat on
IMG-20211115-WA0017.jpg


2nd applied
IMG-20211116-WA0034.jpg

Soon to collect and install once the engine is back in.

More photos up soon
Intake manifold will be getting powder coated.
 
Hey guys, finally got back my calipers, was back to work this week, been super tired buttttt i got the calipers freshly spray and my door panel cards, fibreglassed so more solid than ever, photos will be posted as i get home, this black friday sale traffic is very hectic *facepalms*
 
Feast your eyes gentlemen!
20211127_072157.jpg


Door panel cards
20211127_073658.jpg


Driver side one
20211127_073649.jpg

20211127_073638.jpg

20211127_073634.jpg

Got my painter to do mini bodywork on them to make them more solid so they wont break and big thanks for my Buddy Chaz & Kyra, those 2 have did my carpet and calipers before as well as the valve cover here. Most appreciated.
IMG-20190114-WA0054.jpg


IMG-20190208-WA0101.jpeg
 
Door panel work, it never came out well so back to the drawing board lol but here are the shots

IMG-20211130-WA0032.jpeg


IMG-20211130-WA0034.jpeg
 
Good Morning my dudes, some progress here again on cleaning up

Remember the brake booster? Well watch this!
20211207_084223.jpg

20211207_084227.jpg

20211207_162820.jpg

20211207_163401.jpg

20211207_163416.jpg

20211207_183253.jpg

20211207_183301.jpg


Got my intake yesterday on my 15min break
Powdercoated:dance:
IMG-20211208-WA0037.jpeg


Thats all for now!
 
Hi guys,

HAPPY NEW YEAR!!!:dance:

We are 18/19 days into 2022,

I've been working long hours since my last post, even right now as i type this, im at work waiting for the clock to hit 10pm to go home, extremely long day.
 
So guys,

been a whole lotta stuff happening
Door inserts for panels are on and drilled in, not going in til interior interior is done. The door panel carts have cushion in them courtesy to Jeff Upholstery.
20220113_213220.jpg


So the subframe was the task for today since my crane went down before i even got to start it.
(What i operate)
20220118_081526.jpg


So while they were at the crane I went ahead and go at dismantle the subframe.
20220118_081610.jpg
20220118_081616.jpg


Yes it is unbelievable in a mess, end of Feb it shall be looking brand new.

First end bushings were pretty easy to come out....the middle one.......my lord, terrible!

20220118_090318.jpg


20220118_090325.jpg

20220118_090330.jpg


Little buggers were a hard one to get out but got them out thanks to my pal at work who's a welder.
 
So been busy at work but this is the update on the steering system
20220126_075522.jpg


Thinking of turning the head around
20220126_075533.jpg


This need cleaning up and out
20220126_075539.jpg


Thinking of running it this way so i can have easy access to the ChaseBay P/S delete kit
20220128_172804.jpg


Does anyone know what to use to clean out the steering rack with and what to fill it back with?

I'm proposing on clean it with diesel but i want to know what to fill it back up before i connect it back up.

Let me know if thats a good idea.
 
just about any solvent should clean it out, so diesel would probably work

cant help on the filling it back up though
 
Morning guys, its been awhile so lets get to it.

Subframe parts have been powdercoated, just picked it up yesterday.
20220222_142814.jpg


So the Pinion now i'm going at, gonna get new booths tomorrow but gonna clean up all of that dirty oil inside and get that spic and span
20220222_175938.jpg


Ofcourse you know, going to be using my favourite purple blaster and CRC degreaser to take all thr dirt and build up off.

Then wire brush the paint on the black part off and get it prepped for the Epoxy and black clearcoat spray.
 
Back
Top