Wiring for O2 sensor on maifold! HELP!


turbotovtec

turbotovtec

alan
Joined
Oct 28, 2007
Messages
275
My manifold gasket was leaking, so went to investigate today! Got the manifold all un bolted, removed it from the top and it slipped off the bracket underneath which then pulled all the pins out the sensor. So now i dont know what wire goes where?? Any help is appreciated!

11012009208.jpg

11012009207.jpg
 
Well if you look at the loom where the sensor plugs into coming from the car, and then match the colours so they'll be the right way around when you plug it in? Like Green to green, white to white etc. If you understand me:)
 
lol Somone had to do it somtime sooner or later!

Ask me if your ever unsure on wiring guys!

The two blacks are O2 heater, the green is earth and the white is 0-1v :nice:

Hope you get it sorted now.
 
Oh and the two black can go whichever way around!.... its just connecting the heater element inside the sensor. no diode is present
 
be sure to blast out the connector with WD40 or wimilar warte rdispersant if its got wet too!
 
EK9turbo said:
be sure to blast out the connector with WD40 or wimilar warte rdispersant if its got wet too!
Click to expand...

dude, where do i get this "wimilar warte rdispersant" it sounds like good stuff..:lol::lol::lol:

good info there anyway:nice:
 
Last edited:
lol, had this problem last year. . had to look at a friends car to see where it went lol
 
if something daft like that is going to happen, it will happen to me! :) I put everything back together and its running fine! thanks again!
 
b16 mini said:
dude, where do i get this "wimilar warte rdispersant" it sounds like good stuff..:lol::lol::lol:

good info there anyway:nice:
Click to expand...

In the words of the character Kyle from south-park... "YOU BAST**D" :D lol

Keyboards eh oukan woose'em.! Pfft.

:angry2:
 
You must log in or register to reply here.
Back
Top