MyJDM 96spec ITR Turbo


markp said:
good thread man . jase is breaking his teg btw so if you want parts holla me .
Click to expand...

Thought he was selling as whole :p
I pm'd him a month or so back and he said he was selling as a whole.
 
W80 YAU said:
Your ones will be dual perch coilovers by the sounds of things, not sure if these ones are too.
The Zero 1 coilovers are full height adjustable but have a fixed dampening rate.
Click to expand...

Ah right yea mine must be dual perch then.
 
na plans have changed in the last week . some fud tried to rob it and caused about a grands worth of damage in the process . so its being broken .. The same night they guy tried to rob his another dc2 in glasgow was broken into and the lad couldnt get it started either .
 
markp said:
na plans have changed in the last week . some fud tried to rob it and caused about a grands worth of damage in the process . so its being broken .. The same night they guy tried to rob his another dc2 in glasgow was broken into and the lad couldnt get it started either .
Click to expand...

What a b****** , hope he gets done in for that.
Well if you could pm me spec of his car, ill see if theres anything that catches my eye.
 
when he sends a list to me ill stick it up here .
 
Looking good man, whats the ride like between the Tanabe's and the Cusco's then?
 
^ see while he mentions the Tanabe's.

Get me a pic and those measurements Wifi.
 
coming along nicely man :) get some new number plates made up for it to tidy it up a wee bit more especially on the front! shows up in dannys strobe picture :p not that i can talk ave been meaning to get new plates for ages haha
 
I can feel the Cusco's being stiffer on the drive home.
Not fully tested it out on corners as it still needs aligned so will get back to you when its done ;)

Yeah im gonna get a new plate to replace that done in one at the front :p
Need to find a place that can do the right jap plate size first.
 
I'm sure halfrauds do actual jap plates but I think from many stores there is a waiting time on them getting the actual plate size in. Otherwise there is loads of places on the web for getting one :D
 
Thought i would give this a wee update.

Weather is alot clearer now so the car is coming back out soon.
Got a few new parts on the teg so will upload pics when i get it cleaned.

Until then, here's one pic.

IMAG0019.jpg


Thanks for viewing :)
 
Nice teg mate :) Would love a j's brace for my ek, i think they are the best looking brace :nice:
 
Update on the new parts.
Got myself a Siebon carbon bonnet and managed to finally get my 98spec rear bumper painted and fitted.
Still need my front bumper re-painted, Cusco front lower strut brace to fit and get the car fast road setup with the new suspension.

Some new pics of how the car looks.
333909_2948393143214_1062873275_32492731_1240593313_o.jpg


415270_2979811208646_1062873275_32502781_2098343758_o.jpg


413114_2979815448752_1062873275_32502785_992964169_o.jpg


323613_2995780047857_1062873275_32507542_1157470711_o.jpg


Thanks for viewing.
 
Wee update.

Finally got my front bumper repainted back to oem look. Got the lip painted in gloss black to compliment the carbon which i think goes well.
Also finally got round to re-do the flaked rocker cover in...... well spoon yellow of course :D

462409_3223839389198_1062873275_32603989_71417089_o.jpg


414278_3223839869210_1062873275_32603990_1290133470_o.jpg


458978_3223838429174_1062873275_32603988_300756999_o.jpg


465658_3223837789158_1062873275_32603987_135427951_o.jpg


469776_3223840669230_1062873275_32603991_162108997_o.jpg


469722_3223841469250_1062873275_32603992_425192242_o.jpg


Next on the list is to remove the aircon system then fit my Password:JDM 3-point upper front strut(courtesy of MarkP).
Then it will be service, bonnet pins, carbon spoiler and get an oil cooler kit and some semi slicks for track in june.
 
Last edited:
You must log in or register to reply here.
Back
Top