Tried looking for it and couldn't find anything. If there is a thread on this already I do apologize. I've been struggling to get a straight up answer on this one.
I have an EJ9 as a daily and just recently, presumably, bought an EK9 suspension set. However, after installing it on the car it is sitting a lot higher than it should so I'm having my doubts.
The 'EK9' dampers in the rear have the code: 52610-S04-G110-M1, what looks like a 'D' with a smaller '6' behind that. A little bit lower it has the code 991108.
The EJ9 dampers in the rear have the code: 52610-S04-G010-M1, what looks lika a 'C' and a smaller '1'. A little bit lower it has the code 970516
The 'EK9' dampers in the front have the code: 52610-S03-J610-M1 with a big '2' and a little '9'. A little bit lower it has the code 991102
The EJ9 dampers in the front have the code:52610-S04-J610-M1 with what looks like a Japanese sign and a '6'. I don't have the code that should be under it because it was real filthy and I didn't know I would need it. I can look it up but let's see if somebody can help me as it is.
Some pictures to clarify it all:
Installation:
Before and after (not the best pictures but it'll have to do):
Before it looked more like this picture (with stock suspension) and somewhat like an EK9 should:
After it looks like this
Please help me. I didn't pay a lot for a fake EK9 set. I've asked this question on the forums I usually attend but nobody seems to know exactly.
The S04 stands for four door, S03 three door, S02 (not seen in these codes) two doors.
I've also been told that the (European) EK hatches often (if not always) use the S04 dampers in the back though the JDM EK9's use the S03 dampers.
The J610, G110 and G010 are presumably specs for damping.
Thanks for the help in advance.
I have an EJ9 as a daily and just recently, presumably, bought an EK9 suspension set. However, after installing it on the car it is sitting a lot higher than it should so I'm having my doubts.
The 'EK9' dampers in the rear have the code: 52610-S04-G110-M1, what looks like a 'D' with a smaller '6' behind that. A little bit lower it has the code 991108.
The EJ9 dampers in the rear have the code: 52610-S04-G010-M1, what looks lika a 'C' and a smaller '1'. A little bit lower it has the code 970516
The 'EK9' dampers in the front have the code: 52610-S03-J610-M1 with a big '2' and a little '9'. A little bit lower it has the code 991102
The EJ9 dampers in the front have the code:52610-S04-J610-M1 with what looks like a Japanese sign and a '6'. I don't have the code that should be under it because it was real filthy and I didn't know I would need it. I can look it up but let's see if somebody can help me as it is.
Some pictures to clarify it all:
Installation:
Before and after (not the best pictures but it'll have to do):
Before it looked more like this picture (with stock suspension) and somewhat like an EK9 should:
After it looks like this
Please help me. I didn't pay a lot for a fake EK9 set. I've asked this question on the forums I usually attend but nobody seems to know exactly.
The S04 stands for four door, S03 three door, S02 (not seen in these codes) two doors.
I've also been told that the (European) EK hatches often (if not always) use the S04 dampers in the back though the JDM EK9's use the S03 dampers.
The J610, G110 and G010 are presumably specs for damping.
Thanks for the help in advance.