- Joined
- Aug 11, 2012
- Messages
- 663
Getting ready to start assembling my block now. Was sorting out which bearings to order.
My rods are marked "3" and all my journals are marked with a "C" resulting in a bearing for oem application as a brown/green.
My question is. Three of the rods have what seems to be brown, fine. Yet number 1 going from pulley side has a black bearing in it and the crank marked with a C-4. Am I doing this right?
Crank measures in at 44.99 - 44.98
Journal markings
1 = C/4 - 3
2= C/3
3=C/2
4=C/2
Am I being stupid
Journal with C/4 and 3 markings.
Black bearing
3x
My rods are marked "3" and all my journals are marked with a "C" resulting in a bearing for oem application as a brown/green.
My question is. Three of the rods have what seems to be brown, fine. Yet number 1 going from pulley side has a black bearing in it and the crank marked with a C-4. Am I doing this right?
Crank measures in at 44.99 - 44.98
Journal markings
1 = C/4 - 3
2= C/3
3=C/2
4=C/2
Am I being stupid
Journal with C/4 and 3 markings.
Black bearing
3x