Dave_Buky88
Member
- Joined
- Jul 20, 2014
- Messages
- 47
I have lost confidence in my car last year due to brake issues all season. For some u known reason on a few occasions I hit the brakes and there was nothing there as if the pad had moved and I had brake knock off, I decide to fit a brake prop valve to see if this sorted the issue. As the issue was very inconsistent I could not tell if this sorted it. Another issue I came across was when I blead all the brakes i had a really good pedal. When I then turned the car on, the pedal would go soft. I noticed the pedal does go harder after a few pups but then goes soft again when held down. I have now stripped my car ready for next year and noticed than someone has fitted what would seem to be a DC2 brake servo and I presume a bigger master cylinder. Could this be my issue or could there be an issue with the diaphragm inside? I really don't want anymore brake issues this year! Please advise as I have limited knowledge on these cars. Many thanks, Dave.
I have attached a few pics of my servo and master cylinder below;
I have attached a few pics of my servo and master cylinder below;