Item for sale: Honda Civic EK9 Race Car
Reputation: N/A
Price: SOLD
Paypal: no
Location: Shropshire
Condition: 7/10
Description: See below:
My friend and I bought the car last December, and have spent some time and money on it, and used it for 3 track days at Donington Park twice, and Nurburgring.
The car has an impressive build behind it, with no cost spared. Built by SWMotorsports, the car was freshly imported to be a race car. We have not used it for 7 months as we have both been busy, house move and both of us are getting married. We were looking to sell it for another race car, or keep it, but we both have not had the time to even think about track time. So for now we think its best just to try and sell it.
Engine:
B18C6 Engine
Mugen Carbon air box
Tegiwa 4-2-1 header
JDM EK9 Center section exhaust
De-cat
Toda Racing style back box 98dbs
Billet alloy race engine mounts
SW Nylon rear engine mount
Silicone high temp intake pipe
Silicone radiator and heater hoses
Gearbox:
Y21 gear set and 4.7 Final Drive
Mfactory Carbon Syncros
Helical Limited Slip Diff
New Exedy Stage 1 Clutch kit / Gearbox Service @ SWMotorsports
SW Motorsports light weight balanced flywheel
Buddy club quick shifter
Buddy club type A gear knob
Suspension:
Buddy club N+ racing dampers with custom springs
Super Pro full poly suspension bush kit
SW Motorsports front shocker mounts
Buddy club racing front camber arms
SPC rear camber arms
D2 Racing rear toe adjusters
Super Pro front caster increase kit
All suspension components have been removed and powder coated Porsche Rivera blue
Brakes:
New Honda brake calipers front and rear
EBC dimpled and grooved heat treated turbo discs
New Carbone Lorraine RC6 front brake pads
EBC Yellow rear pads
Integra JDM brake master cylinder and booster
Hel braided clutch line
Hel braided full car brake lines
Tilton bias adjuster
New clutch slave cylinder
Chassis:
SW Motorsports MSA/FIA Multi point Rollcage in Porsche Rivera blue
Strengthened front sub frame powder coated Porsche Rivera blue
SW Motorsports sub frame lock up kit
3 point front upper strut brace
Welded and sealed bulk head
Weight saving carried out car weighs 948kgs with residual fuel
Go Pro camera mounts
Fia Plastics for Performance Lexan Window Kit fully formed with boarders and pro slider.
Cooling:
Setrab Oil Cooler
Alloy race radiator
Wheels & Tyres:
15x7" Gspec wheels
Brand New Kumho V70A Hard Compound Tyres
Interior:
X2 Buddy club adjustable seat rail with side mounts
Sparco bucket seat FIA
Recaro Profi SPG
3" TRS FIA 6 point Harness
Flocked dash
Lifeline 2000 fire system
FIA battery kill with external pull cable
FIA led rain light
SW Motorsports tunnel mount switch panel
Push button start
B&M fuel pressure gauge
Smiths Oil Temp Gauge
Race light weight mini heater box and screen de-misters
Varley red top race batter dry cell type
OMP 330mm dished steering wheel
Exterior:
Spoon carbon mirrors
TRS Tow Straps
EK9 rear spoiler in Porsche Rivera blue
Ek9 JDM, grill, front and rear lips in Porsche Rivera blue
Buddy club racing skirts in Porsche Rivera blue
Light weight doors
Carbon rear diffuser
SWMotorsports imported the car, then stripped it to build it back up as a Civic Cup car, they used it for 2 20 minute races before our purchase.
Bad Points:
As its a race car, there are a few scuffs on the front lip and side skirts, there is also a crack in one of the side skirts. When the stickers came off some paint came off on the side. We had to try and roll the arches at the Nurburgring, they are rippled from the way the inner edge was tapped back. On a track day the car was pulled from the gravel trap and the guy in the truck just yanked the car and pulled the power part of the slam panel apart. It either needs a small new section or welding back on. We tie wrapped it on the day and continued the track day. To get the above repaired will cost about £1000.
Its a seriously amazing car, very very quick and well built, just need a tidy up cosmetically to make it mint, however the body does not effect its performance at all.
I will post new picture up ASAP.
Thanks
Jay
Reputation: N/A
Price: SOLD
Paypal: no
Location: Shropshire
Condition: 7/10
Description: See below:
My friend and I bought the car last December, and have spent some time and money on it, and used it for 3 track days at Donington Park twice, and Nurburgring.
The car has an impressive build behind it, with no cost spared. Built by SWMotorsports, the car was freshly imported to be a race car. We have not used it for 7 months as we have both been busy, house move and both of us are getting married. We were looking to sell it for another race car, or keep it, but we both have not had the time to even think about track time. So for now we think its best just to try and sell it.
Engine:
B18C6 Engine
Mugen Carbon air box
Tegiwa 4-2-1 header
JDM EK9 Center section exhaust
De-cat
Toda Racing style back box 98dbs
Billet alloy race engine mounts
SW Nylon rear engine mount
Silicone high temp intake pipe
Silicone radiator and heater hoses
Gearbox:
Y21 gear set and 4.7 Final Drive
Mfactory Carbon Syncros
Helical Limited Slip Diff
New Exedy Stage 1 Clutch kit / Gearbox Service @ SWMotorsports
SW Motorsports light weight balanced flywheel
Buddy club quick shifter
Buddy club type A gear knob
Suspension:
Buddy club N+ racing dampers with custom springs
Super Pro full poly suspension bush kit
SW Motorsports front shocker mounts
Buddy club racing front camber arms
SPC rear camber arms
D2 Racing rear toe adjusters
Super Pro front caster increase kit
All suspension components have been removed and powder coated Porsche Rivera blue
Brakes:
New Honda brake calipers front and rear
EBC dimpled and grooved heat treated turbo discs
New Carbone Lorraine RC6 front brake pads
EBC Yellow rear pads
Integra JDM brake master cylinder and booster
Hel braided clutch line
Hel braided full car brake lines
Tilton bias adjuster
New clutch slave cylinder
Chassis:
SW Motorsports MSA/FIA Multi point Rollcage in Porsche Rivera blue
Strengthened front sub frame powder coated Porsche Rivera blue
SW Motorsports sub frame lock up kit
3 point front upper strut brace
Welded and sealed bulk head
Weight saving carried out car weighs 948kgs with residual fuel
Go Pro camera mounts
Fia Plastics for Performance Lexan Window Kit fully formed with boarders and pro slider.
Cooling:
Setrab Oil Cooler
Alloy race radiator
Wheels & Tyres:
15x7" Gspec wheels
Brand New Kumho V70A Hard Compound Tyres
Interior:
X2 Buddy club adjustable seat rail with side mounts
Sparco bucket seat FIA
Recaro Profi SPG
3" TRS FIA 6 point Harness
Flocked dash
Lifeline 2000 fire system
FIA battery kill with external pull cable
FIA led rain light
SW Motorsports tunnel mount switch panel
Push button start
B&M fuel pressure gauge
Smiths Oil Temp Gauge
Race light weight mini heater box and screen de-misters
Varley red top race batter dry cell type
OMP 330mm dished steering wheel
Exterior:
Spoon carbon mirrors
TRS Tow Straps
EK9 rear spoiler in Porsche Rivera blue
Ek9 JDM, grill, front and rear lips in Porsche Rivera blue
Buddy club racing skirts in Porsche Rivera blue
Light weight doors
Carbon rear diffuser
SWMotorsports imported the car, then stripped it to build it back up as a Civic Cup car, they used it for 2 20 minute races before our purchase.
Bad Points:
As its a race car, there are a few scuffs on the front lip and side skirts, there is also a crack in one of the side skirts. When the stickers came off some paint came off on the side. We had to try and roll the arches at the Nurburgring, they are rippled from the way the inner edge was tapped back. On a track day the car was pulled from the gravel trap and the guy in the truck just yanked the car and pulled the power part of the slam panel apart. It either needs a small new section or welding back on. We tie wrapped it on the day and continued the track day. To get the above repaired will cost about £1000.
Its a seriously amazing car, very very quick and well built, just need a tidy up cosmetically to make it mint, however the body does not effect its performance at all.
I will post new picture up ASAP.
Thanks
Jay
Last edited: