plummo_vtec
New Member
- Joined
- Mar 18, 2008
- Messages
- 104
I have swapped out my em1 hubs for that of the ek9.
But the ep3 disc bells are too small on the front, so I ground the hub to fit but the callipers won't fit properly and catches on the outer side of the disc. I spaced the callipers which seems to have worked but the near side front bottom mount is bent so possibly knackered but I will try to remidy this.
As for the rears I had to mount them upside down as to attach the hand brake cable but I'm having trouble bleeding.
The help I need is does anyone have an ek9 knuckle and brake bleeding help.
But the ep3 disc bells are too small on the front, so I ground the hub to fit but the callipers won't fit properly and catches on the outer side of the disc. I spaced the callipers which seems to have worked but the near side front bottom mount is bent so possibly knackered but I will try to remidy this.
As for the rears I had to mount them upside down as to attach the hand brake cable but I'm having trouble bleeding.
The help I need is does anyone have an ek9 knuckle and brake bleeding help.