arc intake


A

andyek9

ek9
Joined
Apr 30, 2008
Messages
55
Hi guys, ive just bought an ARC intake for my 9 and it came with no fitting instructions, ive tryed to fit it but the breather hoses wont reach, does anyone have any pics or any info they could give me, cheers andy :nice:
 
htup_0805_03_z+js_gathering+arc_intake.jpg
+
2.jpg
 
thanks for the pics mate, what did you do with the metal piece of breather?
just read the thread saying that the arc system is bad for heat soak :nono:, thinking it was a bad choice now lol but ill see how i get on when its fitted.
 
sorry i dont know ,if you can post pics of all pieces you have.the problem with heat i believe you can solve it my making a "shield" witha a carbon piece or aluminium and seperate the engine with the intake.
 
DSCN1591.jpg


Hi Guys,

Have taken a picture of the filter fitted to the car.

There is a hole in the filter (1) that I think a breather pipe should go into.

There’s another pipe (2) that seems to disappear under the inlet manifold that is attached to a metal pipe that is joined to another metal pipe (4).

There’s a pipe (3) that seems to come up from the bottom that connects to the other end of the metal pipe (4).

The metal pipe (4) seems to join the rubber pipes (2 and 3).

The blue pipe going to the filter has replaced the longer side of the metal pipe (4).

It’s what goes into the hole on the filter and what to do with both ends of the rubber pipe that I’m not sure.

If anybody could advise me or has a picture showing a close up of the pipe arrangement down there I’d be grateful.

Thanks

Andy.
 
1 is for an ek4 which has an extra sensor the ek9 does not have so blank it.
next link pipes 2 and 3 together and job done.
 
quick question, when you buy the replacement filters for the arc intake do they come in 2's. 1 for the top and 1 for the bottom? cheers
 
No_Fear said:
look like battery terminals.
Click to expand...

ok but i see no battery... you guys have to remember im from the USA.. we dont see this kinda stuff very often if at all... so all help and info about this would be very appreciated. thanks
 
the battery has been relocated so thats where jump leads can be connected for quick and easy access
 
nismo.racing.23 said:
ok but i see no battery... you guys have to remember im from the USA.. we dont see this kinda stuff very often if at all... so all help and info about this would be very appreciated. thanks
Click to expand...

That car looks to be from the US of A :p

nismo.racing.23 said:
and where would i be able to find these jump leads? website links would be very helpful and also what is the labor involved in this process?
Click to expand...

You can get the terminals from Summit Racing - High Performance Car and Truck Parts l 800-230-3030 or ebay.

Drill holes where you want the terminals, screw them in. Run cable from battery positive to red terminal and bat negative to black terminal
 
NZ_EK9 said:
That car looks to be from the US of A :p



You can get the terminals from Summit Racing - High Performance Car and Truck Parts l 800-230-3030 or ebay.

Drill holes where you want the terminals, screw them in. Run cable from battery positive to red terminal and bat negative to black terminal
Click to expand...

lol how can u tell its from the states? lookin at the pic it almost looks like gauge cluster is on the left?? is there something in the bay that tells u this info??
 
You must log in or register to reply here.
Back
Top