Hello,
Im James, from Civic-life,
I am asking for help from the Experts, that may know what my problem could be.
At high speeds if I step on the brakes very hard the whole car wobles and the car sways from side to side??
Too me it feels like maybe the fronts are working harder than the rears?
Now I have installed all this myself but I only bled the system out with pumping the breaks with a non return type system, but have not yet had the system vacuume bled and am thinking this could be a problem with air in the ABS valve?? The only other thing that im not sure about is the fact that the front and rear Pads are off different heat ranges and also the rear calipers are Ek9 and the fronts are standard EK4 calipers as they are mached with the Tenzo-R big break kit.
If anyone could sugest a new setup or a quick answer to my problem then this would be great.
Running Gear:
Advan RG2 alloys,
Goodyear Eagle F1 GSD3 Tyres
Tenzo R Big brake kit 300mm (12"),
EK4 front callipers,
EK9 master brake cylinder,
EK9 rear callipers,
EBC rear grooved disks,
EBC red stuff rear,
EBC green stuff front,
Goodridge braided Stainless Break hoses,
Skunk2 Pro camber kit front,
Skunk2 Pro camber kit rear,
Skunk2 Pro-C Coilovers,
Skunk2 Pro rear lower control arms,
ASR rear brace and sway bar with DC2 rear anti-roll bar,
DC Sport Front double upper top Brace,
EK9 RX rear Chassis braces,
Full Hyper-Flex Polyurethane Bush kit,
Thanks,
James.
Im James, from Civic-life,
I am asking for help from the Experts, that may know what my problem could be.
At high speeds if I step on the brakes very hard the whole car wobles and the car sways from side to side??
Too me it feels like maybe the fronts are working harder than the rears?
Now I have installed all this myself but I only bled the system out with pumping the breaks with a non return type system, but have not yet had the system vacuume bled and am thinking this could be a problem with air in the ABS valve?? The only other thing that im not sure about is the fact that the front and rear Pads are off different heat ranges and also the rear calipers are Ek9 and the fronts are standard EK4 calipers as they are mached with the Tenzo-R big break kit.
If anyone could sugest a new setup or a quick answer to my problem then this would be great.
Running Gear:
Advan RG2 alloys,
Goodyear Eagle F1 GSD3 Tyres
Tenzo R Big brake kit 300mm (12"),
EK4 front callipers,
EK9 master brake cylinder,
EK9 rear callipers,
EBC rear grooved disks,
EBC red stuff rear,
EBC green stuff front,
Goodridge braided Stainless Break hoses,
Skunk2 Pro camber kit front,
Skunk2 Pro camber kit rear,
Skunk2 Pro-C Coilovers,
Skunk2 Pro rear lower control arms,
ASR rear brace and sway bar with DC2 rear anti-roll bar,
DC Sport Front double upper top Brace,
EK9 RX rear Chassis braces,
Full Hyper-Flex Polyurethane Bush kit,
Thanks,
James.