Civic injector type difference?

[mulvihb]

Hello guys,

Hopefully someone out there can give me a definite answer on this. I’m just in the middle of dropping a B16B Type R engine into my EG6.
Does anyone no if the injectors are the same for a B16A2 engine and a B16B engine. The only noticeable difference I can see are the injector plugs. The B16A2 injector has OBD 1 type of plug and the B16B has a OBD 2 type of plug. Just wondering if both are the exact same other than the plug type. From research on this forum I see both engines have 240cc fully saturated injectors.
Planning to run the B16A2 injectors on the B16B engine due to wiring issues. I’d just like to confirm if there are any sneaky differences or restrictions I should be aware off.

Many thanks.

 

[lumek4]

like u say im sure its just the fact one is obd1 and the other obd2. why not go for some 98 spec ITR injectors they will be much better prob need a remap to get the full out them

 

[blinx9900]

like u say im sure its just the fact one is obd1 and the other obd2. why not go for some 98 spec ITR injectors they will be much better prob need a remap to get the full out them

actually, all honda civic injectors 92-00 are the same flow rating, which is 240CC it dosent matter if its a b16b, b18c or even a d16y, they all flow 240cc. the only difference is the one already listed which is the plugs on the back.