coilovers


VTec Performance

Specializing in performance honda parts,
Donator
Joined
Aug 31, 2009
Messages
3,329
was going to go with d2 coilovers

the spring rate is front: 13

rear: 6.2


i'm not familiar with these things so would that be suitable for an ej6 coupe with b16b!!

thansk
 
just got a set of these and there great. havent messed about with the height or stiffness yet but so far id recommend them. :nice:
 
Is it mostly for street use or some track time ?

Daily driven or weekend car ?
 
They seem quite far apart those rates :S
 
Seems to be a large gap between front and rear.

It will understeer a lot if you bring it on the track.

Otherwise a soft rear make it comfortable on the street.
 
Not going to handle very well on those rates, figures out to be around 2.95hz front and 2.6hz rear, you really want to be aiming to have the rear .2/.4hz higher than the fronts. If you can pick spring rates then you want to be aiming more at 10kF/7kR, this will give you 2.6hz front and 2.8hz rear. The balance will be about optimal on those, the standard rates as mentioned, will understeer loads.

Personally I think even 10/7 is too stiff, especially if your roads are as bad as ours over here.
 
Last edited:
Back
Top