Eck
Member
- Joined
- May 27, 2011
- Messages
- 295
Item for sale: 17" Compomotive Mo5's ET50 in 4x100
Reputation: http://www.ek9.org/forum/reputation-center/53267-eck.html
Price:£300
Paypal?: No sorry, bank transfer or cash on collection only
Location: Fife, Scotland
Condition: 7/10
Description: Time to get rid of these as they are just lying around. They are in good condition with only a couple of bits of light curbing (barely noticeable) and the traditional Compomotive paint quality with a bit of bubbling on one of the wheels. Three of the tyres are Toyo Proxes 4's in 205/45/R17. There is plenty of life left in the tyres. The other was unfortunately punctured beyond repair, so that's been replaced with a brand new budget tyre and all four wheels have been balanced at the same time. The wheels aren't perfect, but they are by no means in bad condition. Also, one of the centre caps has died a death in storeage as the clips are broken off
Just being as honest as I can! I don't have a picture with the new tyre but if it's required then I'll happily get pics of whatever is needed Wheels can be posted but that would be £30 extra!
Pictures:
Item for sale: Stack Professional Oil & Boost Gauges
Reputation: http://www.ek9.org/forum/reputation-center/53267-eck.html
Price:£125 each or £240 for both.
Paypal?: No sorry, bank transfer or cash on collection only
Location: Fife, Scotland
Condition: 9.5/10
Description: To free up some cash for other things, I may sell these if I get offered what they are worth. If not, I'll keep them and find money other ways
These are the Professional range gauges, which cost me £142.80 each! These are brand new, and the only reason they are 9.5 out of 10 is due to the box being a bit torn from where I've taken them out. Could call it being extremely picky, but again I don't like to be dishonest. You can see from the picture where the box is a bit ripped. If these are bought together, I'll throw in the gauge pod surround for free Again, if any more pictures are required just let me know!
Pictures:
Item for sale: Vortech Supercharger pulleys, brackets, shaft etc etc (Everything except the charger!)
Reputation: http://www.ek9.org/forum/reputation-center/53267-eck.html
Price:£150
Paypal?: No sorry, bank transfer or cash on collection only
Location: Fife, Scotland
Condition: 7/10
Description: To cut a long story short, the BOV managed to become blocked on my Supercharger, which in turn smashed it beyond repair Thus everything else being useless to me, but could be of the benefit to others as Vortech informed me that they don't make the shaft or any of the B series charger bits anymore, so it's always good to have spares! Everything that I got back from Performance HQ will be included except the Setrab oil cooler, but add on £40 and it's yours!. So lines, fittings, brackets, pulleys, belts, charge cooler, everything! A bit of history with the unit though; I had an accident back in January, and thought I had repaired everything, but obviously not as a pulley that connects to the shaft pulley had worked a bolt work itself loose, eventually damaging the shaft pulley. This was all stripped down and sent away by PHQ to the company they use for machining. Whilst away, they stripped the shaft down and ensured it was balanced correctly, and fabricated a custom, shorter pulley. This went from a 5.2" to a 4.7". Once completed, it was all put back together with a shorter belt and mapped by Russ Paton. It gained 30bhp at the wheels, and went from 0.48 bar to 0.9 bar with the changes! I've got printouts that can be found if requested. The work cost £300 alone and made a hell of a difference to the way it drove. If you're after a cheap, effective upgrade for your Vortech unit whilst getting plenty of spares, this is it! Again, if you need more specific pictures, let me know and I'll take what is required
Pictures:
Reputation: http://www.ek9.org/forum/reputation-center/53267-eck.html
Price:£300
Paypal?: No sorry, bank transfer or cash on collection only
Location: Fife, Scotland
Condition: 7/10
Description: Time to get rid of these as they are just lying around. They are in good condition with only a couple of bits of light curbing (barely noticeable) and the traditional Compomotive paint quality with a bit of bubbling on one of the wheels. Three of the tyres are Toyo Proxes 4's in 205/45/R17. There is plenty of life left in the tyres. The other was unfortunately punctured beyond repair, so that's been replaced with a brand new budget tyre and all four wheels have been balanced at the same time. The wheels aren't perfect, but they are by no means in bad condition. Also, one of the centre caps has died a death in storeage as the clips are broken off
Just being as honest as I can! I don't have a picture with the new tyre but if it's required then I'll happily get pics of whatever is needed Wheels can be posted but that would be £30 extra!Pictures:
Item for sale: Stack Professional Oil & Boost Gauges
Reputation: http://www.ek9.org/forum/reputation-center/53267-eck.html
Price:£125 each or £240 for both.
Paypal?: No sorry, bank transfer or cash on collection only
Location: Fife, Scotland
Condition: 9.5/10
Description: To free up some cash for other things, I may sell these if I get offered what they are worth. If not, I'll keep them and find money other ways
These are the Professional range gauges, which cost me £142.80 each! These are brand new, and the only reason they are 9.5 out of 10 is due to the box being a bit torn from where I've taken them out. Could call it being extremely picky, but again I don't like to be dishonest. You can see from the picture where the box is a bit ripped. If these are bought together, I'll throw in the gauge pod surround for free Again, if any more pictures are required just let me know!Pictures:
Item for sale: Vortech Supercharger pulleys, brackets, shaft etc etc (Everything except the charger!)
Reputation: http://www.ek9.org/forum/reputation-center/53267-eck.html
Price:£150
Paypal?: No sorry, bank transfer or cash on collection only
Location: Fife, Scotland
Condition: 7/10
Description: To cut a long story short, the BOV managed to become blocked on my Supercharger, which in turn smashed it beyond repair
Thus everything else being useless to me, but could be of the benefit to others as Vortech informed me that they don't make the shaft or any of the B series charger bits anymore, so it's always good to have spares! Everything that I got back from Performance HQ will be included except the Setrab oil cooler, but add on £40 and it's yours!. So lines, fittings, brackets, pulleys, belts, charge cooler, everything! A bit of history with the unit though; I had an accident back in January, and thought I had repaired everything, but obviously not as a pulley that connects to the shaft pulley had worked a bolt work itself loose, eventually damaging the shaft pulley. This was all stripped down and sent away by PHQ to the company they use for machining. Whilst away, they stripped the shaft down and ensured it was balanced correctly, and fabricated a custom, shorter pulley. This went from a 5.2" to a 4.7". Once completed, it was all put back together with a shorter belt and mapped by Russ Paton. It gained 30bhp at the wheels, and went from 0.48 bar to 0.9 bar with the changes! I've got printouts that can be found if requested. The work cost £300 alone and made a hell of a difference to the way it drove. If you're after a cheap, effective upgrade for your Vortech unit whilst getting plenty of spares, this is it! Again, if you need more specific pictures, let me know and I'll take what is required Pictures:
Last edited: