EJ9 to EK9 Conversion


E

ek9mt

New Member
Joined
Apr 25, 2012
Messages
11
Hi,

I have a facelift EJ9 and bought Crashed Pre-Facelift EK9.

My question is can I transfer all parts of the EK9 in the EJ9 ? Will they all fit ?.

Also can I keep the interior loom of the EJ9 ? Because the Facelift version has two seatbelt airbags and I don't want to loose them.

Thanks.
 
yes everything can be changed, as you have a facelift ej9 and you are using the engine out of a pre facelift you will have to get a facelift ek4/ek9 engine loom, you dont have to change the interior loom its straight plug and play
 
B18C'R EK said:
yes everything can be changed, as you have a facelift ej9 and you are using the engine out of a pre facelift you will have to get a facelift ek4/ek9 engine loom, you dont have to change the interior loom its straight plug and play
Click to expand...

Can I use the loom that I have on the Pre-Faceklift EK9 and make an adapter or something ? The ECU is of a Pre-Facelift EK9 so I dont think facelift vti loom will fit into it right ?
 
No the face lift loom will not plug into the pre face lift Ecu you could get a jumper harness or get a face lift ek9 ecu...
 
chrissyEK41991 said:
No the face lift loom will not plug into the pre face lift Ecu you could get a jumper harness or get a face lift ek9 ecu...
Click to expand...

Which one should I buy ? Im still not an expert on the loom :( and which loom should i change if i buy the jumper ? The engine loom only ?
 
You must log in or register to reply here.
Back
Top