DuncanB
Member
- Joined
- Nov 21, 2011
- Messages
- 293
I have had a good look through various brake threads on the forum and am still a little bit puzzled as to what to do about the rear brakes on my Jordan.
I have changed the front brakes from 262's to EK9 282's. but now the rear discs and pads need to be changed as they are worn out, what I am wondering is if there is a big benefit from upgrading to EK9 brakes on the rear? or am I better off just putting an uprated set of VTI sized discs and pads?
I will also be changing for a 1"master cylinder and putting some better brake fluid in at the same time.
Any advice would be grealty appreciated.
I have changed the front brakes from 262's to EK9 282's. but now the rear discs and pads need to be changed as they are worn out, what I am wondering is if there is a big benefit from upgrading to EK9 brakes on the rear? or am I better off just putting an uprated set of VTI sized discs and pads?
I will also be changing for a 1"master cylinder and putting some better brake fluid in at the same time.
Any advice would be grealty appreciated.
