Evap Purge Control Solenoid Valve Help

[DelSol_B16B]

Can somebody please confirm if you have the above valve on you ek9. Based on bosniacrx's post about b16b wiring, connector A6 was used and has a wire on it. Also if possible, please post pictures. Thanks a lot!

 

[DelSol_B16B]

This is an example of the solenoid valve.

Can somebody confirm please!

 

[rvm]

Don't think so man Mine is a 1999 ek9

 

[Dino-Spumoni]

Please explain your problem more. Do you have a b16b that you're attempting to swap into a delsol?
The most I could readily find for you was that the USDM 99-00 Si has one, (b16a2) and it connects to a 2 wire connector #C114.

 

[blinx9900]

This is an example of the solenoid valve.

Can somebody confirm please!

i have a 2000 model year b16b and it does NOT have that, hope that helps

 

[DelSol_B16B]

Please explain your problem more. Do you have a b16b that you're attempting to swap into a delsol?
The most I could readily find for you was that the USDM 99-00 Si has one, (b16a2) and it connects to a 2 wire connector #C114.

Actually I have no problem. My b16b is running well since I dropped it on my del sol last January. I just recently pulled out my engine harness and I am just going to shorten it for I made it a little longer (I rewired the jdm harness to connect to the usdm shock tower connectors). Currently the vacuum hose coming from the back of the intake manifold is connected to the charcoal canister. Now, I was just thinking if I need to connect a purge control solenoid valve.

Hmmm... It's kinda weird because the ECU connector A6 was used. For you guys who has no purge solenoid valve on your ek9s, could you please verify if A6 is used. And also, confirm where the vacuum hose is connected. VTEC Rules!!