If you have evo rails you can probably make them fit by cutting the mounting tabs off and making brackets to allow them to sit in the right place. You'd need a pretty competant welder though - personally, although its more expensive, id buy ones that will bolt in 1st time and work as they were designed to. Ek9 rails would be the best option, dc2 ones are the next best but even they would need minor modification
Lozzah it doesnt matter ek9 rails fit either ones...Dc2 and EG recaro rails work 3/4 holes line up fine...the 4th just takes about 10 mins to modify. ..the Dc2 rails sit the seat a little lower than ek9 rails..